Flip the towel right side down. To determine where to place the tabs, center a spatula atop one of the towel’s shorter ends, and use straight pins to mark the spatula’s width. Place a tab at each pinned point, slightly over- lapping the tabs with the top of the towel. Make sure that each tab’s closed side lines up with the pins and that the open sides face each other. Remove the pins, then topstitch both tabs in place. Repeat on the towel’s other short end.
Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.

As the oldest arts educational institution in the state, Maine College of Art has been helping students succeed since 1882. Located in the picturesque Arts District of Portland, Maine; the college-town enjoys a distinguished reputation for its beauty and artistic culture. Among its numerous awards, the location was named #1 Most Liveable City by Forbes Magazine. The intimacy of a mentorship-based education is ensured with the College’s student to teacher ratio of 10:1 (one of the best in the nation).
I placed another order in April for more slides. This time, they were not stacked together, but literally just thrown in a box with zero packing material. Heavy drawer slides just literally tossed loose into a box with no packing material. Obviously, they were also damaged. Again, I emailed, and got no reply. I called and spoke to Teresa, who sent me replacements. When I explained that I had emailed to no reply, she had me forward the email to her email address. She received my email and was able to find it in the info@... inbox, and expressed surprise that no one had replied to my earlier emails.
As Chief Creative Officer and Founding Partner at Brit + Co, Anjelika Temple brings her voracious consumption of all things creative and colorful to DIY projects, geeky gadgetry finds and more. When she's not DIY-ing her heart out, you'll find her throwing dinner parties with friends or adventuring with her husband David, their daughter Anokhi, and their silly dog Turkey.
This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills. 

Ben Hobbs has been building period reproduction furniture for nearly 30 years. After teaching high school math for 10 years, Ben's passion for early American furniture and architecture drew him into the shop in 1982. Since then, Ben has operated as a bespoke custom furniture maker reproducing fine early American pieces, focusing on Southern and local NC examples. After training all three of his sons to be accomplished furniture makers, Ben opened his shop doors in 1996 to train students in his woodworking school.

By completing a form on this website, you will be able to receive email correspondence from Canadian Woodworking.   These emails may include information on upcoming events or special offers for subscribers. If you do not wish to receive email correspondence please email orderdesk@canadianwoodworking.com  and ask to be removed from our email list. Every email that we send to you will include an "opt-out" from receiving future email correspondence. 
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
There is no cost to use the database. Registering is not required. You should be able to browse the database and click through the links. Having said that, considering the fact there are so many browsers out there being used, this site's software might not allow some visitors to browse, it all depends on the Internet traffic, and your browser's compatibility.

MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this email to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.
Nine graduates of the Cabinet & Furniture Making program are among the community of woodworkers at the two-story Charlestown Furniture Makers shop, established in 2012 by David Ambler CF '11. "Like North Bennet Street School, one of the things we offer is a culture of excellence," explains David. "There's a real enjoyment being among people with shared interests in the valuing of craft."
As a custom furniture maker at NBSS, you’ll learn how to use and maintain both hand tools and power equipment. You’ll estimate costs, choose materials, and prepare working drawings for each project. You’ll cut various joints, turn, carve, and bend wood, apply marquetry or veneers. You’ll develop the knowledge, skills, and confidence necessary to create thoughtful furniture pieces to exacting standards.

We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Finishing:  It’s important to know how to select the right finish for the job and wood.  We train students in surface and material preparation, and in hand applied finishes such as oil, shellac, and varnishes.  Classes include selecting color and applying stains.  Specialty finishes such as French polishing are also covered along with training in how to use tools for finishing work and the proper use of fillers.
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
These delightful little volumes (inspired by Heather Mann of dollarstorecrafts.com) throw the book at desktop clutter. To transform ordinary matchboxes into match-"book" containers, print all five dust-jacket images, sized to fit basic 300-count matchboxes, from www.countryliving.com/matchboxcovers. Cut out and adhere the covers and pages to your matchboxes using spray mount. Then fill 'em up with the items referenced on the spines, and shelve.
6.Change your lightbulbs. Nothing is more frustrating than light bulbs burning out, especially because replacing them is one of those things you put on the to-do list and immediately forget about. Take the time to replace all of those lights for a brighter, happier space. In your bedroom or den, try opting for lower wattage lights (between 20- and 50-watts) to create a cozier and more romantic ambience. Here is a great guide to lighting your home.

By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.


We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
The application process for Furniture Making opens 9 months in advance of the course start date. There is no fee for applying! Once you apply, we will schedule a brief phone interview to get a better sense of your woodworking experience and make sure the class is a good fit for you. Accepted applicants will be invited to register. We ask for a deposit of $200 at the time of registration to ensure your place in the class. 
Hanging planters are a big hit nowadays so don't let this opportunity of building your own DIY hanging planter pass! Learn the step-by-step instructions how to work a jigsaw and make this stunning planter to hang in your home to complement your furniture. You can hang it above your coffee table or put in flowers as a Valentine’s Day or Mother's Day gift for your loved one.

Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
12.Change glass cabinet doors. It's easy to repaint a wooden door, but what about when you have glass doors and are tired of people being able to peek at your mess? Turns out you can paint that too. If you're done with your glass door, paint over them from the inside or staple fabric over the glass. If you don't have fabric, you can use free printable decorative paper instead!
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Turning:  Turning is an art in and of itself.  In these classes, students are mentored in how to choose and work with the perfect wood to get the perfect turning result.  We teach wet and dry wood work, specialty tool use such as lathes and skew chisels, and how to make custom tools for specific projects.  Techniques for spindle-work, hollow-end grain work, faceplate turning, and milling will be covered. We address special joinery considerations and precision fitting parts. 

Hi Liz. I am sorry you were having trouble unsubscribing to the newsletter. Your information has been updated. Your email address has been removed from our Woodworkers Guild of America E-Newsletter mailing list. Please allow up to 5 business days for your request to be completed. If you have any questions, please contact our customer service team at 1-855-253-0822.

Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.


And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills.
Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.

We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
Attending a furniture design school provides a student with an opportunity to discover their craft, learn and develop design methods and techniques, master technical advancements in areas such as sustainability, and ultimately determine the trajectory of their career. Hands on experience is a vital element of the learning process, as is comprehensive knowledge of materials and their properties. The graduate leaves school with a portfolio showcasing their unique talents and abilities.
Steve Brown CF '90, Instructor in the Cabinet & Furniture Making program, recently published a great how-to article in Fine Woodworking. The classic cabriole leg is a solid design choice for period furniture makers, but even with just that leg style, choosing from a variety of foot styles to go with it can be daunting. Steve helps clarify the process with step-by-step instructions for laying out and carving three common feet for the cabriole leg: the pad, slipper, and trifid foot. 

Most of our products are in stock waiting and ready to ship the day you order them (look for our green IN STOCK icon) – and if you purchase a PRO Membership, you get free standard shipping for an entire year. We guarantee satisfaction on your order and know you will find the best products when you shop with us! We aim to be the first company you call when you need woodworking or building products. Make us your go-to supplier!
Thinking my orders were now correct, I went to install the slides, and found you had sent me an odd number of Left/Right Blum drawer clips (they are sold in pairs. I ordered pairs. You sent me 5 right and 3 left). I emailed Teresa, personally, and guess what? No reply. So I called, and someone told me Teresa had quit. This new person apologized and said she'd send me a Left clip the same day.
1. Rearrange your furniture. This may sound simple, but rearranging furniture is a great (and free!) way to completely change the look and feel of your home. If you always find yourself climbing over an ottoman, move your couch back to create a passing lane. Is it too cramped? Try moving your side table to another room that's more spacious. Click here for more tips.
“Going to the furniture making evening class was the highlight of my week (and I wasn't the only person on the course to say that!) Emma was really brilliant at sharing her knowledge and experience to help guide us all through the tricky process of hand-making furniture, and thanks to her we all managed to make something we were proud to take home”   -    Kay Parnell, Student.
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
×