Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
Auditing:  MSF has an auditing policy that allows for students who have successfully completed a training level (Basic, Intermediate, Master-Level) to enroll again in the same level in order to deepen their mastery.  Auditing is available on a space available basis for 50% of the standard tuition.  Auditing students do not receive a second Certificate of Accomplishment.  Please note that auditing (for a reduced fee) is not available for individual Project & Skills Workshops that are not also part of the professional training (see Concurrent Classes).
After seeing this list of easy woodworking projects with step-by-step instructions, crafting projects made with wood isn't actually hard to start. If you have some wood, the proper hand tools, and a little know-how, for sure you can build one or twenty-two of these wooden project plans. They are the perfect stylish additions to your home and you will now have a collection which you can be proud of as your very own work. From planters to a picnic table, name it and you can build it!
Cross-stitch makes the leap from fabric to glassware with help from a free font and transparent sticker sheets ($13.99 for ten 8 1/2"W x 11"L sheets; amazon.com). Go to myfonts.com and download the Home Sweet Home font. Use it to type out the names of pantry staples, adding a decorative flourish if you like, in a Microsoft Word document, then adjust the type size and alignment to fit your canisters (from $3.99 for one quart; containerstore.com). Following package instructions for the decal sheets, print your document(s). Once the ink has dried, lightly coat each sheet with a thin layer of hair spray, to prevent smearing; let dry. Cut out and trim each label, then affix to the canisters. Note: The labels won’t be entirely waterproof, so when necessary, carefully wash your canisters by hand.
Blogger Brittany Moser of darkroomanddearly.com made these Polaroid-inspired drink rests from color photos and square tiles (a steal at 15 cents apiece). First, trim a photo to 3 3/4"W x 3 1/4"H. Using a foam brush, spread Mod Podge on the back of the image; then position it on a tile, leaving a 1/4-inch border at the top and sides, and a 3/4-inch border at the bottom. Let dry for 30 minutes. Spread Mod Podge over the photo and exposed tile borders and let dry for one hour; repeat two to three more times. Spray with clear sealant and let dry for 24 hours. Finally, affix adhesive felt pads to the underside corners of your picture-perfect tiles.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
We have a great location — Our woodworking school is located near Knoxville, Tennessee. We are very accessible (within a day’s drive of 70% of the population in the USA!) for USA woodworkers. While many of our woodworkers come from Southeastern USA locations such as Atlanta, we also have woodworkers who come from further-away places such as Texas, California, Oregon, Washington, Montana, Wyoming, Minnesota, Maine — 43 states so far and counting!  We’ve even had woodworkers come from other countries  — as far away as Australia! Additionally, our location near the Great Smoky Mountains and Gatlingburg ensures that there is an abundance of fantastic activities for you or your family to experience as well.

Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
Attending a furniture design school provides a student with an opportunity to discover their craft, learn and develop design methods and techniques, master technical advancements in areas such as sustainability, and ultimately determine the trajectory of their career. Hands on experience is a vital element of the learning process, as is comprehensive knowledge of materials and their properties. The graduate leaves school with a portfolio showcasing their unique talents and abilities.
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.
Hand Tool Selection & Use:  In these classes we explore various hand tools such as chisels, hand planes, handsaws, etc. and train students how to use them safely and maintain them well. We go over various characteristics of different tools and make recommendations based on experience.  Students will learn how to select the perfect tool for the perfect result.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Course Entry Points:  There is great value in moving through our series of courses with a cohesive cohort of peers and our goal is to support this by having published start dates for each session.  However, because the nature of the instruction is so individualized, MSF may make allowances for students who wish to enter mid-session.  For example, If a student wants to enter in week 3 of the 12-week session, we may allow their enrollment contingent on their willingness to work outside of structured class hours and receive individual tutoring.
First, use a drill to make a 1/8-inch-wide hole halfway down into a new cork ($3.99 for 30; winemakingsuperstore.com). Next, twist off the top of a vintage trophy (typically a few bucks each at thrift shops and garage sales). Apply superglue to the underside of the trophy top's base and the screw that extends from it. Insert the screw into the cork and twist the pieces together until flush and a tight bond forms. Allow one hour of drying time before using your prize design.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
Work Study:  Students may apply for our Work Study option.   In return for acting as Shop Monitor during open shop periods, MSF will reduce the student’s tuition.  Shop monitors must be present in the shop during assigned hours primarily to enhance safety (assigned hours will not conflict with class hours).  Among other responsibilities, Shop Monitors make sure policies are honored and are responsible for the leaving the shop in good order at the end of their shift.  If space is available, Monitors may use the shop to work on their own projects during their shifts.  Our preference is to award work study positions first to students experiencing financial hardship.  Please notify us if you are interested in work study .  For more information, see our Tuitions & Registration page.
Thinking my orders were now correct, I went to install the slides, and found you had sent me an odd number of Left/Right Blum drawer clips (they are sold in pairs. I ordered pairs. You sent me 5 right and 3 left). I emailed Teresa, personally, and guess what? No reply. So I called, and someone told me Teresa had quit. This new person apologized and said she'd send me a Left clip the same day.

Because of his years of professional woodworking, his knowledge is broad. As a long-time professional woodworker he has built countless examples of fine dovetailed casework and drawers, carved tables, delicate inlay, sculpted chairs and elegant turned post beds. You’ll benefit from both his vast knowledge of woodworking and his many years of teaching experience. He’s also written six woodworking books as well as numerous articles for Fine Woodworking magazine.
We will review the history of furniture making in America with a visit to the Decorative Arts Collection at the Museum of Fine Arts in Boston and have Cambridge artist/craftsman Mitch Ryerson show us his work and talk about design process. Students will learn traditional woodworking techniques beginning with the use of hand tools, power tools and finally woodworking machines.
The remaining tuition payment ($7,000.00) and materials deposit ($300.00) is due 45 days before the start date. Any unused materials deposit will be returned at the end of the course. You may use the materials deposit to buy books, finish, wood, fasteners, and hardware. Due to credit card processing fees, we kindly ask that students make this portion of the tuition payments by personal check, money order, or bank check.
All Rights Reserved. WoodworkerMagazines.com is not responsible for printing or typographical errors. Pricing, policies, and availability are subject to change without notice. Product recommendations may result in a commissioned. Accessing this site constitues usage of the site terms and privacy policies. Designated trademarks and brands are the property of their respective owners. Use of any trademark or picture is for informational and descriptive purposes only. See Disclosure Statement and Privacy Policy for Terms of Use.
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.
Look at the bigger picture. Consider what happens during different months or times during the year. Think about what is going on in the other parts of your life. When is the best time for you to take on a new project, role or responsibility? Take into account other commitments that zap your energy. Do you have a sick parent, a spouse who travels all the time or young children who demand all of your available time and energy? 
×