Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.

Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards. 

Our offering includes brass plated butt hinges, continuous (�piano�) hinges, precision milled and extruded solid brass hinges for cabinets and furniture, traditional overlay and inset cabinet hinges in a number of finishes, Soss invisible hinges, cylinder hinges, European style cup hinges for face frame and frameless (panel) construction cabinets, and hinges for bi-fold door, angled door, thick door, molded edge door, overhead bin door, flap, tray and tabletop applications.

Carving a Fan for Your Next Piece of Furniture The Carved Fan in Furniture Carvings found on 18th furniture are sometimes an ostentatious display of vines and leaves which cover nearly every exposed surface of the chair or chest to which they’re applied. I’ve always had a greater appreciation for minimal amounts of carving that accentuate a furniture […]
Prerequisites:  Each level (Basic, Intermediate, and Master-Level) is a prerequisite for the next.  However, students entering our Professional Training series can submit to a Skills Assessment by one of MSF’s instructors to determine if they may enter into the program and receive more advanced instruction without first satisfying previous training requirements.

And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​


Steve Brown CF '90, Instructor in the Cabinet & Furniture Making program, recently published a great how-to article in Fine Woodworking. The classic cabriole leg is a solid design choice for period furniture makers, but even with just that leg style, choosing from a variety of foot styles to go with it can be daunting. Steve helps clarify the process with step-by-step instructions for laying out and carving three common feet for the cabriole leg: the pad, slipper, and trifid foot.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
Nine graduates of the Cabinet & Furniture Making program are among the community of woodworkers at the two-story Charlestown Furniture Makers shop, established in 2012 by David Ambler CF '11. "Like North Bennet Street School, one of the things we offer is a culture of excellence," explains David. "There's a real enjoyment being among people with shared interests in the valuing of craft."
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
Description: Works of Ahhh Wood Painting Set is great for parties, school projects or fun at home with the family. The Nutcracker Prince kit includes: one wood nutcracker, fake fur hair and beard, five non-toxic acrylic paint tubs, one non-toxic glitter glaze, 12 gemstones, one sticker sheet, two paintbrushes and one instruction sheet with painting guide. Includes instructions for the new free painting app to plan your project.

Licensing and/or certification requirements for jobs in this field are not the same in every state and may include educational, testing, and/or experiential requirements beyond those offered by your Penn Foster Program. You should contact the state professional licensing board or similar regulatory body in the state(s) where you plan to work to determine their requirements before enrolling in your Program. Please click here for contact information for state licensing/regulatory boards and certain industry licensing information.
Hand Tool Selection & Use:  In these classes we explore various hand tools such as chisels, hand planes, handsaws, etc. and train students how to use them safely and maintain them well. We go over various characteristics of different tools and make recommendations based on experience.  Students will learn how to select the perfect tool for the perfect result. 

This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills.


We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.

The Austin School of Furniture & Design is located at 3508 E. Cesar Chavez St. and shares space with the Splinter Group. Although the school has its own dedicated space, we are also a part of a larger shared warehouse full of makers and artists. ASFD and Splinter Group strongly believe in supporting the woodworking community, furthering the craft and making shop space and education more readily available and affordable for everyone.


Making over plain cotton upholstery fabric requires nothing more than a household disinfectant and water. Working outside, and wearing protective eyewear and gloves, lay the desired yardage for your project flat on a sheet of plastic. In a measuring cup, mix together ½ cup bleach and ½ cup water. Use a plastic spoon to drib-ble the liquid all over the fabric. When you're satisfied with the pattern, let dry, then run the fabric through a regular cycle in your washer and dryer. Take it to a local upholsterer (we sent ours to tapemeasure

All Rights Reserved. WoodworkerMagazines.com is not responsible for printing or typographical errors. Pricing, policies, and availability are subject to change without notice. Product recommendations may result in a commissioned. Accessing this site constitues usage of the site terms and privacy policies. Designated trademarks and brands are the property of their respective owners. Use of any trademark or picture is for informational and descriptive purposes only. See Disclosure Statement and Privacy Policy for Terms of Use.


To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
Cabinets with heavy duty hidden hinges are nearly universal, with most home improvement stores putting these useful pieces of hardware at the center of their hinge options. These invisible hinges can be used in the 10.2 million kitchens or 14.2 million bathrooms that are remodeled annually, as they work on any cabinet door. While the main benefit of concealed hinges is to create a sleek, streamlined look for your cabinetry, there are several practical benefits as well.

This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly.
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.

Thinking my orders were now correct, I went to install the slides, and found you had sent me an odd number of Left/Right Blum drawer clips (they are sold in pairs. I ordered pairs. You sent me 5 right and 3 left). I emailed Teresa, personally, and guess what? No reply. So I called, and someone told me Teresa had quit. This new person apologized and said she'd send me a Left clip the same day.


Nightstands are nearly almost as important as the headboard of a mattress when it comes to a bedroom. They are absolutely perfect for placing lamps and novels for that late night reading, an alarm clock to remind you when it should be time to start your day, and for that nice, coaxing mug of sleepy time tea when you decide it is time to start winding down.
Milking and/or Faking an Accent for all it’s Worth.  Have you ever noticed that craftspeople with foreign accents are automatically assumed to be old-world artists worthy of obscenely large fees?  In this class, we will help you make the most of your foreign accent, or teach you how to fake one convincingly so that you can take advantage of these silly stereotypes and command 50-200% more for your work/commissions.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many

All About Wood:  What are the different characteristics of wood – how does each move, shrink, expand, respond – and how does one allow for all of this in design and building?  How do different woods respond to tooling and machinery?  What are practical considerations in selecting woods for different types of furniture – along with aesthetic considerations, finishing characteristics, issues with availability, cost, purchase sources, and environmental considerations?

We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.


After seeing this list of easy woodworking projects with step-by-step instructions, crafting projects made with wood isn't actually hard to start. If you have some wood, the proper hand tools, and a little know-how, for sure you can build one or twenty-two of these wooden project plans. They are the perfect stylish additions to your home and you will now have a collection which you can be proud of as your very own work. From planters to a picnic table, name it and you can build it!
See the Light: Abundant windows and glass-paned doors allow sunlight to pour inside. The seamless transition between indoors and out makes the room appear larger. Open up a tight kitchen with floating shelves. While they won’t hide toasters and coffeemakers, they’re a sleek alternative to upper cabinetry, which often overwhelms a tiny space. | CoastalLiving.comSee the Light: Abund
Description: Works of Ahhh Wood Painting Set is great for parties, school projects or fun at home with the family. The Nutcracker Prince kit includes: one wood nutcracker, fake fur hair and beard, five non-toxic acrylic paint tubs, one non-toxic glitter glaze, 12 gemstones, one sticker sheet, two paintbrushes and one instruction sheet with painting guide. Includes instructions for the new free painting app to plan your project. 

Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Your kitchen is the heart of your home, the epicenter for hosting and the hub for masterful meals. When you first moved into your home, everything was new and matched to create a uniform and beautiful kitchen space. As the years have gone by, though, you've made changes, swapped out appliances, and now there's something off about your kitchen. Chances are, it's probably the cabinets. Your once beautiful cabinets have become old and musty, creating a wall-to-wall eyesore in your favorite room of the house. Luckily, there are some easy ways to freshen up those cabinets and bring some life back to your kitchen.
This course is focused on developing the skills that will allow you to start to find your voice as a furniture designer / maker. Design will be the consistent thread through the numerous projects of this class. We will take a hybrid approach to furniture making by blending traditional hand tool techniques with pragmatic use of woodworking machines. 
×