Finishing:  It’s important to know how to select the right finish for the job and wood.  We train students in surface and material preparation, and in hand applied finishes such as oil, shellac, and varnishes.  Classes include selecting color and applying stains.  Specialty finishes such as French polishing are also covered along with training in how to use tools for finishing work and the proper use of fillers.
Flip the towel right side down. To determine where to place the tabs, center a spatula atop one of the towel’s shorter ends, and use straight pins to mark the spatula’s width. Place a tab at each pinned point, slightly over- lapping the tabs with the top of the towel. Make sure that each tab’s closed side lines up with the pins and that the open sides face each other. Remove the pins, then topstitch both tabs in place. Repeat on the towel’s other short end.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!


1. Rearrange your furniture. This may sound simple, but rearranging furniture is a great (and free!) way to completely change the look and feel of your home. If you always find yourself climbing over an ottoman, move your couch back to create a passing lane. Is it too cramped? Try moving your side table to another room that's more spacious. Click here for more tips.
Flip the towel right side down. To determine where to place the tabs, center a spatula atop one of the towel’s shorter ends, and use straight pins to mark the spatula’s width. Place a tab at each pinned point, slightly over- lapping the tabs with the top of the towel. Make sure that each tab’s closed side lines up with the pins and that the open sides face each other. Remove the pins, then topstitch both tabs in place. Repeat on the towel’s other short end.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.
We offer great projects — Our projects are beautifully-proportioned, attractive designs that you’re sure to be proud of as you create heirloom furniture. In fact, many people say that we offer some of the best woodworking projects in the USA! Lonnie personally custom-designs each furniture project to combine classic good looks with time-tested mortise-and-tenon and dovetail joints. These joints are considered the hallmark of fine craftsmanship. Lonnie also designs each woodworking project to maximize your learning experience so that you take new home techniques and skills.
Certificate programs may last up to a full year. They can be specialized in a particular type of furniture, such as cabinets, or a specific style, such as Spanish colonial. Many certificate programs offer generalized furniture making techniques and may culminate with the creation of a piece of furniture. Depending on previous experience and education, students may be qualified to enter into advanced certificate programs.
×