TechShop is a playground for creativity. Part fabrication and prototyping studio, part hacker-space and part learning center, TechShop provides access to over $1 million worth of professional equipment and software. We offer comprehensive instruction and expert staff to ensure you have a safe, meaningful and rewarding experience. Most importantly, at TechShop you can explore the world of making in a collaborative and creative environment.
Traditionally furniture makers learned their craft working as an apprentice in the Master Craftsman's shop.  We’re offering this course as a second step in a furniture making apprenticeship, building on woodworking skills by deepening your understanding of design, expanding your range of joinery and decorative techniques to build well designed and robust furniture.

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Hanging planters are a big hit nowadays so don't let this opportunity of building your own DIY hanging planter pass! Learn the step-by-step instructions how to work a jigsaw and make this stunning planter to hang in your home to complement your furniture. You can hang it above your coffee table or put in flowers as a Valentine’s Day or Mother's Day gift for your loved one.
Great instruction — Lonnie is a master woodworker and a master teacher as well as a published author, known for his many woodworking books and articles. Lonnie has been woodworking for more than thirty-five years and teaching for over twenty-five. In other words, Lonnie has a background of woodworking skills to teach from. He’s not simply a magazine editor or tool salesman that works wood occasionally and teaches a few days each year; he has made woodworking and teaching woodworking his full-time passion (take a look at Lonnie’s work).
The remaining tuition payment ($7,000.00) and materials deposit ($300.00) is due 45 days before the start date. Any unused materials deposit will be returned at the end of the course. You may use the materials deposit to buy books, finish, wood, fasteners, and hardware. Due to credit card processing fees, we kindly ask that students make this portion of the tuition payments by personal check, money order, or bank check.
By completing a form on this website, you will be able to receive email correspondence from Canadian Woodworking.   These emails may include information on upcoming events or special offers for subscribers. If you do not wish to receive email correspondence please email orderdesk@canadianwoodworking.com  and ask to be removed from our email list. Every email that we send to you will include an "opt-out" from receiving future email correspondence. 
We offer great projects — Our projects are beautifully-proportioned, attractive designs that you’re sure to be proud of as you create heirloom furniture. In fact, many people say that we offer some of the best woodworking projects in the USA! Lonnie personally custom-designs each furniture project to combine classic good looks with time-tested mortise-and-tenon and dovetail joints. These joints are considered the hallmark of fine craftsmanship. Lonnie also designs each woodworking project to maximize your learning experience so that you take new home techniques and skills.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
Some of the basic courses offered in furniture design schools often cover such subjects as furniture and industrial design history, along with design theory. Students will also usually be required to take courses that help them understand what makes a good quality piece of furniture. Other classes my cover furniture styles, market trends, and materials.
"Wow this homemade creamer is even easier than all the others I seen because this one the ingredients are just whipped together and put in container and refridgate. The vanilla is so soothing and adds just that secial touch to your creamer. Take some to the office and share. Your co-workers will be asking you which creamer is this. Very easy to do."
Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.
Hanging planters are a big hit nowadays so don't let this opportunity of building your own DIY hanging planter pass! Learn the step-by-step instructions how to work a jigsaw and make this stunning planter to hang in your home to complement your furniture. You can hang it above your coffee table or put in flowers as a Valentine’s Day or Mother's Day gift for your loved one. 

This simple craft turns your tattered cardigans, shrunken V-necks, or the kids' castoffs into coasters that you can use time and time again. Wash 100% wool in hot water, then dry with an agitator like jeans. After three rounds, sweaters should feel taut and felt-like. Use a pencil and a large-mouthed glass to trace circles onto the fabric and then snip out a set.
See the Light: Abundant windows and glass-paned doors allow sunlight to pour inside. The seamless transition between indoors and out makes the room appear larger. Open up a tight kitchen with floating shelves. While they won’t hide toasters and coffeemakers, they’re a sleek alternative to upper cabinetry, which often overwhelms a tiny space. | CoastalLiving.comSee the Light: Abund
The Lead Instructor for the course is Aled Lewis. You can see Fine Woodworking's video about Aled here. For each project, Aled is joined by a co-teacher who specializes in the relevant skills. The following list is subject to change. Most of the instructors have websites which you can visit for more extensive views of their work. See the list of instructors here.
The Austin School of Furniture & Design is located at 3508 E. Cesar Chavez St. and shares space with the Splinter Group. Although the school has its own dedicated space, we are also a part of a larger shared warehouse full of makers and artists. ASFD and Splinter Group strongly believe in supporting the woodworking community, furthering the craft and making shop space and education more readily available and affordable for everyone.
Wortheffort is a dedicated woodworking school . A place to inspire, educate and motivate new artisans in this craft. We have afterschool programs, evening classes and long weekend classes targeting all skill ranges. Starting out we’ll specialize in hand tool and basic machinery education but hope to quickly expand into carving, turning, scrolling and sculpting. We also have a YouTube Channel and Facebook page.

It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
If you bought this superb polished table in a store, it would cost you a fortune, but our detailed instructions will help you make one for less than $100. And it looks like highly polished stone, but no-one would know it’s actually made from concrete with a wooden base. Also, you can embellish the top with leaf prints, like the table shown here, or personalize it with glass or mosaic tiles or imprints of seashells.

I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
Steve Brown CF '90, Instructor in the Cabinet & Furniture Making program, recently published a great how-to article in Fine Woodworking. The classic cabriole leg is a solid design choice for period furniture makers, but even with just that leg style, choosing from a variety of foot styles to go with it can be daunting. Steve helps clarify the process with step-by-step instructions for laying out and carving three common feet for the cabriole leg: the pad, slipper, and trifid foot.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?

This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills.
Finishing:  It’s important to know how to select the right finish for the job and wood.  We train students in surface and material preparation, and in hand applied finishes such as oil, shellac, and varnishes.  Classes include selecting color and applying stains.  Specialty finishes such as French polishing are also covered along with training in how to use tools for finishing work and the proper use of fillers.
Traditionally furniture makers learned their craft working as an apprentice in the Master Craftsman's shop.  We’re offering this course as a second step in a furniture making apprenticeship, building on woodworking skills by deepening your understanding of design, expanding your range of joinery and decorative techniques to build well designed and robust furniture.
We have a great location — Our woodworking school is located near Knoxville, Tennessee. We are very accessible (within a day’s drive of 70% of the population in the USA!) for USA woodworkers. While many of our woodworkers come from Southeastern USA locations such as Atlanta, we also have woodworkers who come from further-away places such as Texas, California, Oregon, Washington, Montana, Wyoming, Minnesota, Maine — 43 states so far and counting!  We’ve even had woodworkers come from other countries  — as far away as Australia! Additionally, our location near the Great Smoky Mountains and Gatlingburg ensures that there is an abundance of fantastic activities for you or your family to experience as well.
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.

Work Study:  Students may apply for our Work Study option.   In return for acting as Shop Monitor during open shop periods, MSF will reduce the student’s tuition.  Shop monitors must be present in the shop during assigned hours primarily to enhance safety (assigned hours will not conflict with class hours).  Among other responsibilities, Shop Monitors make sure policies are honored and are responsible for the leaving the shop in good order at the end of their shift.  If space is available, Monitors may use the shop to work on their own projects during their shifts.  Our preference is to award work study positions first to students experiencing financial hardship.  Please notify us if you are interested in work study .  For more information, see our Tuitions & Registration page.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!

This design is oh-so classy and beautiful and it’s one of the finest woodworking projects you’ll want to build today! You can display potted flowers, a cute clock, and a couple of picture frames on this DIY circular wood shelf. It's effortlessly beautiful and easy to build! If you're also looking for Mother's Day crafts, you can include this on your list.

×