Ben Hobbs has been building period reproduction furniture for nearly 30 years. After teaching high school math for 10 years, Ben's passion for early American furniture and architecture drew him into the shop in 1982. Since then, Ben has operated as a bespoke custom furniture maker reproducing fine early American pieces, focusing on Southern and local NC examples. After training all three of his sons to be accomplished furniture makers, Ben opened his shop doors in 1996 to train students in his woodworking school.

Veneering and Marquetry.  Learn to skillfully select and apply different veneers   using traditional methods make use of hide glue and a specialty veneer hammer.  We’ll also train you in techniques for using cold glues, and to do vacuum bag veneering with flat or curved cauls. Marquetry – the art of is creating pictures in wood and veneer, is also included in these classes.


Nightstands are nearly almost as important as the headboard of a mattress when it comes to a bedroom. They are absolutely perfect for placing lamps and novels for that late night reading, an alarm clock to remind you when it should be time to start your day, and for that nice, coaxing mug of sleepy time tea when you decide it is time to start winding down.
We have a great location — Our woodworking school is located near Knoxville, Tennessee. We are very accessible (within a day’s drive of 70% of the population in the USA!) for USA woodworkers. While many of our woodworkers come from Southeastern USA locations such as Atlanta, we also have woodworkers who come from further-away places such as Texas, California, Oregon, Washington, Montana, Wyoming, Minnesota, Maine — 43 states so far and counting!  We’ve even had woodworkers come from other countries  — as far away as Australia! Additionally, our location near the Great Smoky Mountains and Gatlingburg ensures that there is an abundance of fantastic activities for you or your family to experience as well.
Schools that offer furniture design degrees are often necessary for learning the ins and outs of the furniture industry. This special area of industrial design is sometimes considered to be a mixture of several different industries, including interior design, fashion, and architecture. A good furniture design school will usually incorporate all of these elements into their furniture design programs.
Making over plain cotton upholstery fabric requires nothing more than a household disinfectant and water. Working outside, and wearing protective eyewear and gloves, lay the desired yardage for your project flat on a sheet of plastic. In a measuring cup, mix together ½ cup bleach and ½ cup water. Use a plastic spoon to drib-ble the liquid all over the fabric. When you're satisfied with the pattern, let dry, then run the fabric through a regular cycle in your washer and dryer. Take it to a local upholsterer (we sent ours to tapemeasure

A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!

Uses Sisters High School shop (2000+ SqFt). SHS shop has seven workbenches with quick release vises and additional work/assembly tables. Stationary tools include a SawStop tablesaw, two bandsaws, jointer, planer, 2 drill press’s, a wide belt sander, belt and disk sanders and a grinder. Portable powertools include circular and jig saws, drills, plate joiner, routers, ro sanders. Handtools (provided by the instructor) include measuring and marking tools a variety of handsaws, bench, block, scraping and joinery planes, rasps & files, chisels, gouges and sharpening equipment. Topics include SAFETY, wood selection, tool buying and maintenance, sharpening, joinery and finishing. One instructor. Class size is limited to fourteen students.
teastore.com). To get the show on the road, freehand the tea bag, tag, and spoon designs, using our image as a guide, with Pebeo's Porcelaine fine-point marker ($4.82; dickblick.com). Don't worry if you make a mistake—the ink can be washed away for up to 72 hours. Allow at least 24 hours' drying time, then bake the items for 35 minutes in a 300°F oven. Let cool completely, and wash (the ink's dishwasher safe!) before brewing up a spot of Earl Grey.

Woven throughout the course will be presentations on the history of furniture making, the evolution of furniture styles and a review of contemporary styles. We’ll also do demonstrations on some advanced techniques such as shaping and using curved forms, drawer making, carcass construction, steam-bending, lamination, inlay, chairmaking, veneering, marquetry, and some contemporary joinery techniques. 
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.

Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.

Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
I just don't get it, guys. Aren't you a large company that ships tons of stuff? How can you mess so much stuff up? Basic process control - you ship lots of Blum slides, right? Haven't you figured out how to package them? And why don't you check the email address you post on the website? When someone leaves the company, why don't you set up an auto-reply so that people emailing her know they won't be getting an answer? And when a customer is angry because you've shorted an order, why don't you FedEx overnight a replacement RIGHT AWAY, rather than use some cut-rate discount shipper?
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!

Our offering includes brass plated butt hinges, continuous (�piano�) hinges, precision milled and extruded solid brass hinges for cabinets and furniture, traditional overlay and inset cabinet hinges in a number of finishes, Soss invisible hinges, cylinder hinges, European style cup hinges for face frame and frameless (panel) construction cabinets, and hinges for bi-fold door, angled door, thick door, molded edge door, overhead bin door, flap, tray and tabletop applications.
TechShop is a playground for creativity. Part fabrication and prototyping studio, part hacker-space and part learning center, TechShop provides access to over $1 million worth of professional equipment and software. We offer comprehensive instruction and expert staff to ensure you have a safe, meaningful and rewarding experience. Most importantly, at TechShop you can explore the world of making in a collaborative and creative environment.
Our founder, Austin Waldo, got his passion for woodworking by hanging around his grandfather’s woodshop while growing up in Kansas. Over the years he has continued to be an avid hobbyist and became involved in the woodworking industry through taking classes, managing social media for local craftsmen, and running a successful Meetup Group, the Woodworking Social Club.
Steve Brown CF '90, Instructor in the Cabinet & Furniture Making program, recently published a great how-to article in Fine Woodworking. The classic cabriole leg is a solid design choice for period furniture makers, but even with just that leg style, choosing from a variety of foot styles to go with it can be daunting. Steve helps clarify the process with step-by-step instructions for laying out and carving three common feet for the cabriole leg: the pad, slipper, and trifid foot. 

Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
We are a woodworking school centered on traditional hand tool use. Our instructors are passionate about woodworking and about the preservation of the traditions of working wood by hand. Classes are small and each student is provided their own bench and set of tools. During classes students are given the opportunity to try many different tools from many different manufactures to help them make informed decisions on their future tool purchases.
Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.

Each of our facilities includes laser cutters, plastics and electronics labs, a machine shop, a wood shop, a metal working shop, a textiles department, welding stations and a waterjet cutter. Members have open access to design software, featuring the entire Autodesk Design Suite. Huge project areas with large work tables are available for completing projects and collaborating with others. Free coffee and fresh popcorn are always available for your enjoyment. We also offer a number of experience-driven corporate events developed specifically to bring teams together and engage them in the act of making.


We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
I placed another order in April for more slides. This time, they were not stacked together, but literally just thrown in a box with zero packing material. Heavy drawer slides just literally tossed loose into a box with no packing material. Obviously, they were also damaged. Again, I emailed, and got no reply. I called and spoke to Teresa, who sent me replacements. When I explained that I had emailed to no reply, she had me forward the email to her email address. She received my email and was able to find it in the info@... inbox, and expressed surprise that no one had replied to my earlier emails.
The Lead Instructor for the course is Aled Lewis. You can see Fine Woodworking's video about Aled here. For each project, Aled is joined by a co-teacher who specializes in the relevant skills. The following list is subject to change. Most of the instructors have websites which you can visit for more extensive views of their work. See the list of instructors here.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
Personally identifying information is information that can be used to identify who you are such as: name, mailing address, email address. To enter certain areas of the site, you will be required to register and provide information about yourself. This information is for the purposes of Canadian Woodworking and helps us to tailor the site to best meet the needs of our audience. 
The Austin School of Furniture & Design will soon offer comprehensive furniture immersive programs that range from an intensive week-long project build to full-time furniture maker programs. These comprehensive classes are intended for intermediate to advanced students and will require an application and interview process or ASFD instructor approval.
These charming accessories don't require any special tools to create. We simply gathered up four key rings and strung on: a brass cow tag, a plastic toy calf, a two-inch wooden printing block, and a couple vintage skeleton keys. A key ring can loop directly through the holes of the cow tag and skeleton keys; for the calf and printing block, just center and screw in a metal eye hook with your hands, then link the key ring through (key rings, $2.17 for 25; 1" diam.; eye hooks, 59 cents for 20; ⅝"; zorotools.com). For similar fobs, head to Michaels for the calf figurine ($2.99; michaels.com for stores), and search Etsy or eBay for tags, blocks, and keys (from $3 each).

12.Change glass cabinet doors. It's easy to repaint a wooden door, but what about when you have glass doors and are tired of people being able to peek at your mess? Turns out you can paint that too. If you're done with your glass door, paint over them from the inside or staple fabric over the glass. If you don't have fabric, you can use free printable decorative paper instead!
We have a great location — Our woodworking school is located near Knoxville, Tennessee. We are very accessible (within a day’s drive of 70% of the population in the USA!) for USA woodworkers. While many of our woodworkers come from Southeastern USA locations such as Atlanta, we also have woodworkers who come from further-away places such as Texas, California, Oregon, Washington, Montana, Wyoming, Minnesota, Maine — 43 states so far and counting!  We’ve even had woodworkers come from other countries  — as far away as Australia! Additionally, our location near the Great Smoky Mountains and Gatlingburg ensures that there is an abundance of fantastic activities for you or your family to experience as well.
I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
Prerequisites:  Each level (Basic, Intermediate, and Master-Level) is a prerequisite for the next.  However, students entering our Professional Training series can submit to a Skills Assessment by one of MSF’s instructors to determine if they may enter into the program and receive more advanced instruction without first satisfying previous training requirements.
We mentor each student to develop the advanced skills needed to express their own inspired, distinctive style.  For example, we may explore the design nuances and practical considerations of working with specialized, exotic woods and surface textures, along with associated unique finishing techniques. We constantly seek those sweet, memorable moments when both instructor and student recognize the student’s shift into their next level of mastery.

The Penn Foster Career School Furniture and Cabinet Maker online program includes practical exercises and a Work Experience Option to give you hands-on training and field experience relative to your program and career goals. You’ll also receive a variety of tools and learning aids to help you through your cabinet design and woodworking classes, including a tape measure, combination square, T-bevel, hammer, chisel set, dovetail saw, c-clamp, and videos.
VANCOUVER, BRITISH COLUMBIA– – Western Forest Products Inc. -2011 HIGHLIGHTS —  EBITDA of $62 million, a $15 million increase over 2010–  Sales of $854 million were 28% higher than 2010–  Year-end liquidity at $112 million, compared to $85 million at the end    of 2010–  Net debt to capitalization reduced to 13% from 23% last year–  Cash flow from operations increased to $44 million”2011 … Read News
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
But until then, I’ve been thinking of other ways to use my hands and create things.  (Even though many of our saws and tools have been stolen.) But I’m feeling a little antsy to make some quick projects, because creating makes me extremely happy…..so we’re calling this surge in me to create something simple, THERAPY.  In fact, I need to call up a few friends and have them make some with me because friends and creating is a favorite combo of mine!  (Any out of town-ers want to fly in?! ;) )
Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.

Description: Works of Ahhh Wood Painting Set is great for parties, school projects or fun at home with the family. The Nutcracker Prince kit includes: one wood nutcracker, fake fur hair and beard, five non-toxic acrylic paint tubs, one non-toxic glitter glaze, 12 gemstones, one sticker sheet, two paintbrushes and one instruction sheet with painting guide. Includes instructions for the new free painting app to plan your project.
We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
We offer great projects — Our projects are beautifully-proportioned, attractive designs that you’re sure to be proud of as you create heirloom furniture. In fact, many people say that we offer some of the best woodworking projects in the USA! Lonnie personally custom-designs each furniture project to combine classic good looks with time-tested mortise-and-tenon and dovetail joints. These joints are considered the hallmark of fine craftsmanship. Lonnie also designs each woodworking project to maximize your learning experience so that you take new home techniques and skills.

As a custom furniture maker at NBSS, you’ll learn how to use and maintain both hand tools and power equipment. You’ll estimate costs, choose materials, and prepare working drawings for each project. You’ll cut various joints, turn, carve, and bend wood, apply marquetry or veneers. You’ll develop the knowledge, skills, and confidence necessary to create thoughtful furniture pieces to exacting standards.
Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.

Most of our products are in stock waiting and ready to ship the day you order them (look for our green IN STOCK icon) – and if you purchase a PRO Membership, you get free standard shipping for an entire year. We guarantee satisfaction on your order and know you will find the best products when you shop with us! We aim to be the first company you call when you need woodworking or building products. Make us your go-to supplier!
Hand Tool Selection & Use:  In these classes we explore various hand tools such as chisels, hand planes, handsaws, etc. and train students how to use them safely and maintain them well. We go over various characteristics of different tools and make recommendations based on experience.  Students will learn how to select the perfect tool for the perfect result.

Let’s take it up a notch and start building something more serious. This project may take more than just a few hours to complete, but the final item would be worth it as you can see in the image. It is a beautiful entryway table with drawers made entirely from scrap pallet wood. You can make one yourself by following the instructions from the picture.
Cabinets with heavy duty hidden hinges are nearly universal, with most home improvement stores putting these useful pieces of hardware at the center of their hinge options. These invisible hinges can be used in the 10.2 million kitchens or 14.2 million bathrooms that are remodeled annually, as they work on any cabinet door. While the main benefit of concealed hinges is to create a sleek, streamlined look for your cabinetry, there are several practical benefits as well.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
We will review the history of furniture making in America with a visit to the Decorative Arts Collection at the Museum of Fine Arts in Boston and have Cambridge artist/craftsman Mitch Ryerson show us his work and talk about design process. Students will learn traditional woodworking techniques beginning with the use of hand tools, power tools and finally woodworking machines.

Auditing:  MSF has an auditing policy that allows for students who have successfully completed a training level (Basic, Intermediate, Master-Level) to enroll again in the same level in order to deepen their mastery.  Auditing is available on a space available basis for 50% of the standard tuition.  Auditing students do not receive a second Certificate of Accomplishment.  Please note that auditing (for a reduced fee) is not available for individual Project & Skills Workshops that are not also part of the professional training (see Concurrent Classes).
×