Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.

"Wow this homemade creamer is even easier than all the others I seen because this one the ingredients are just whipped together and put in container and refridgate. The vanilla is so soothing and adds just that secial touch to your creamer. Take some to the office and share. Your co-workers will be asking you which creamer is this. Very easy to do."
Licensing and/or certification requirements for jobs in this field are not the same in every state and may include educational, testing, and/or experiential requirements beyond those offered by your Penn Foster Program. You should contact the state professional licensing board or similar regulatory body in the state(s) where you plan to work to determine their requirements before enrolling in your Program. Please click here for contact information for state licensing/regulatory boards and certain industry licensing information. 

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.

Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster. 

Finishing:  It’s important to know how to select the right finish for the job and wood.  We train students in surface and material preparation, and in hand applied finishes such as oil, shellac, and varnishes.  Classes include selecting color and applying stains.  Specialty finishes such as French polishing are also covered along with training in how to use tools for finishing work and the proper use of fillers.
“Going to the furniture making evening class was the highlight of my week (and I wasn't the only person on the course to say that!) Emma was really brilliant at sharing her knowledge and experience to help guide us all through the tricky process of hand-making furniture, and thanks to her we all managed to make something we were proud to take home”   -    Kay Parnell, Student.
These charming accessories don't require any special tools to create. We simply gathered up four key rings and strung on: a brass cow tag, a plastic toy calf, a two-inch wooden printing block, and a couple vintage skeleton keys. A key ring can loop directly through the holes of the cow tag and skeleton keys; for the calf and printing block, just center and screw in a metal eye hook with your hands, then link the key ring through (key rings, $2.17 for 25; 1" diam.; eye hooks, 59 cents for 20; ⅝"; zorotools.com). For similar fobs, head to Michaels for the calf figurine ($2.99; michaels.com for stores), and search Etsy or eBay for tags, blocks, and keys (from $3 each).

Most of our products are in stock waiting and ready to ship the day you order them (look for our green IN STOCK icon) – and if you purchase a PRO Membership, you get free standard shipping for an entire year. We guarantee satisfaction on your order and know you will find the best products when you shop with us! We aim to be the first company you call when you need woodworking or building products. Make us your go-to supplier!
Steve Brown CF '90, Instructor in the Cabinet & Furniture Making program, recently published a great how-to article in Fine Woodworking. The classic cabriole leg is a solid design choice for period furniture makers, but even with just that leg style, choosing from a variety of foot styles to go with it can be daunting. Steve helps clarify the process with step-by-step instructions for laying out and carving three common feet for the cabriole leg: the pad, slipper, and trifid foot. 

This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com.

It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!

This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly.


Licensing and/or certification requirements for jobs in this field are not the same in every state and may include educational, testing, and/or experiential requirements beyond those offered by your Penn Foster Program. You should contact the state professional licensing board or similar regulatory body in the state(s) where you plan to work to determine their requirements before enrolling in your Program. Please click here for contact information for state licensing/regulatory boards and certain industry licensing information.

Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Industrial design degrees are similar to furniture design degrees. However, students working toward earning industrial design degrees don’t usually focus just on furniture. Instead, they focus on designing and building a number of different consumer products. Some of the areas that industrial design instructors might touch on may include toy design, automobile design, and product design.
Attending a furniture design school provides a student with an opportunity to discover their craft, learn and develop design methods and techniques, master technical advancements in areas such as sustainability, and ultimately determine the trajectory of their career. Hands on experience is a vital element of the learning process, as is comprehensive knowledge of materials and their properties. The graduate leaves school with a portfolio showcasing their unique talents and abilities.
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills.
Our founder, Austin Waldo, got his passion for woodworking by hanging around his grandfather’s woodshop while growing up in Kansas. Over the years he has continued to be an avid hobbyist and became involved in the woodworking industry through taking classes, managing social media for local craftsmen, and running a successful Meetup Group, the Woodworking Social Club.
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.
Making over plain cotton upholstery fabric requires nothing more than a household disinfectant and water. Working outside, and wearing protective eyewear and gloves, lay the desired yardage for your project flat on a sheet of plastic. In a measuring cup, mix together ½ cup bleach and ½ cup water. Use a plastic spoon to drib-ble the liquid all over the fabric. When you're satisfied with the pattern, let dry, then run the fabric through a regular cycle in your washer and dryer. Take it to a local upholsterer (we sent ours to tapemeasure
Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.
Veneering and Marquetry.  Learn to skillfully select and apply different veneers   using traditional methods make use of hide glue and a specialty veneer hammer.  We’ll also train you in techniques for using cold glues, and to do vacuum bag veneering with flat or curved cauls. Marquetry – the art of is creating pictures in wood and veneer, is also included in these classes.
Choosing the right degree and degree program for you will ultimately depend on your career goals. If you’re looking to start your career sooner rather than later, you may want to opt for an associate degree in furniture design or industrial design. This type of degree will often enable you to find entry level positions with several different companies.
From making your own picture frames to constructing your own furniture, woodwork is one area where many DIY’ers cut their teeth and where many skilled professionals make an honest living. Whether you’re wet behind the ears or a seasoned expert at the craft, here’s a roundup of handy new woodworking tools to consider for your next equipment purchase. PocketJig200 The […]
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
This course is focused on developing the skills that will allow you to start to find your voice as a furniture designer / maker. Design will be the consistent thread through the numerous projects of this class. We will take a hybrid approach to furniture making by blending traditional hand tool techniques with pragmatic use of woodworking machines. 
We have a great location — Our woodworking school is located near Knoxville, Tennessee. We are very accessible (within a day’s drive of 70% of the population in the USA!) for USA woodworkers. While many of our woodworkers come from Southeastern USA locations such as Atlanta, we also have woodworkers who come from further-away places such as Texas, California, Oregon, Washington, Montana, Wyoming, Minnesota, Maine — 43 states so far and counting!  We’ve even had woodworkers come from other countries  — as far away as Australia! Additionally, our location near the Great Smoky Mountains and Gatlingburg ensures that there is an abundance of fantastic activities for you or your family to experience as well.
In a nutshell, these are the 25 top small wood items that I like the most in my house or office. These projects are so easy that a professional woodworker can even build one while working on some other major wood project. Tell us if you enjoy the article. Have you tried any project from this list yet? Did you complete it? Please share your reviews, questions, and projects in the comments. I’d love to hear about your experiences with these small wood projects. Also, share this with more and more your woodworker friends.

Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.


The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.

From making your own picture frames to constructing your own furniture, woodwork is one area where many DIY’ers cut their teeth and where many skilled professionals make an honest living. Whether you’re wet behind the ears or a seasoned expert at the craft, here’s a roundup of handy new woodworking tools to consider for your next equipment purchase. PocketJig200 The […]
Tualatin, OR — October 1, 2014 — SawStop, LLC, the world leader in table saw safety, is celebrating 10 years of designing and manufacturing the world’s safest table saws. To commemorate the anniversary, between October 1 and December 31, 2014, in the United States and Canada each customer who purchases a new Industrial Cabinet Saw will receive over $200 in free […]
Designing and building furniture is no easy task. A furniture design career, although difficult at times, can be a very rewarding and lucrative career for some people. In order to get started in this type of career, however, a person should have heaps of special knowledge, talent, and skill. These particular skills can often be acquired by attending furniture design schools.
Paid Private or Shared Tutorials:  Students needing or wanting to receive private, customized instruction from a teacher in order to address particular challenges, keep up with the class or make up for absences, may arrange for Paid Private or Shared Tutorials during open shop time.  Tutorials are available on a space and instructor-available basis, and the fee will depend on the number of instructional hours requested and students sharing the instructor. Please contact us to arrange for your tutorial and we’ll quote the fee at that time.

Turning:  Turning is an art in and of itself.  In these classes, students are mentored in how to choose and work with the perfect wood to get the perfect turning result.  We teach wet and dry wood work, specialty tool use such as lathes and skew chisels, and how to make custom tools for specific projects.  Techniques for spindle-work, hollow-end grain work, faceplate turning, and milling will be covered. We address special joinery considerations and precision fitting parts.
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
When you are gathering inspiration for barn door Plan, be sure to note the cost of the tools used in the plan. Barn door tools can often cost more than your actual door! But, there are many clever and affordable do it yourself tools options in the tutorials mentioned below! Let us explore some DIY Barn Door Tutorials. Just click on the blue text below and check some amazing fun Barn doors. They might be different from the one shown in above picture.
With the right tools, you can crank one of these bad boys out in less than a day’s work. It’s definitely more of a niche item, but don’t be fooled into thinking that it’s not versatile! You can use one of these to display a bowling trophy, a prized-collectible action figure, a family photo that has to stand out from the rest, and even most foods that don’t taste like cake!
Most of our products are in stock waiting and ready to ship the day you order them (look for our green IN STOCK icon) – and if you purchase a PRO Membership, you get free standard shipping for an entire year. We guarantee satisfaction on your order and know you will find the best products when you shop with us! We aim to be the first company you call when you need woodworking or building products. Make us your go-to supplier!
The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary. 

Uses Sisters High School shop (2000+ SqFt). SHS shop has seven workbenches with quick release vises and additional work/assembly tables. Stationary tools include a SawStop tablesaw, two bandsaws, jointer, planer, 2 drill press’s, a wide belt sander, belt and disk sanders and a grinder. Portable powertools include circular and jig saws, drills, plate joiner, routers, ro sanders. Handtools (provided by the instructor) include measuring and marking tools a variety of handsaws, bench, block, scraping and joinery planes, rasps & files, chisels, gouges and sharpening equipment. Topics include SAFETY, wood selection, tool buying and maintenance, sharpening, joinery and finishing. One instructor. Class size is limited to fourteen students.
This course is focused on developing the skills that will allow you to start to find your voice as a furniture designer / maker. Design will be the consistent thread through the numerous projects of this class. We will take a hybrid approach to furniture making by blending traditional hand tool techniques with pragmatic use of woodworking machines. 
×