Put your dusty encyclopedias to good use with this side table. To assemble, cut trim to form a box frame that fits snugly around one book, nail frame to the tabletop’s underside, and paint the top. Drill a hole the size of dowel through each book’s center add glue dowel to the center of the table's underside. Stack encyclopedias, lining up holes, and twisting (as shown). Skewer the dowel through the holes to attach the tabletop

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block. 

To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
Learn woodworking techniques and create beautiful pieces of furniture with Penn Foster Career School’s Furniture and Cabinet Maker program. Learn the skills that can help put you on a path toward working for a furniture or cabinet retail store, manufacturer, repair/refinishing shop, home improvement store, or even opening your own woodworking shop and specialize in custom cabinet and furniture making. At Penn Foster Career School, you can complete the Furniture and Cabinet Maker program in as little as four months – all while you train at home at a pace that's right for you. 

Industrial design degrees are similar to furniture design degrees. However, students working toward earning industrial design degrees don’t usually focus just on furniture. Instead, they focus on designing and building a number of different consumer products. Some of the areas that industrial design instructors might touch on may include toy design, automobile design, and product design.

By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.
Open Shop Availability:  Open shop time is held on most  Mondays-Fridays 4:30pm to at least 8:00pm.  Weekend shop time is usually from 9:00am-6:00pm unless a class is in session – please see the class schedule for specific weekend shop availability.  Shop space is allocated on a space-available basis first to currently enrolled students, students enrolled for private mentorship sessions, and to instructors; and then to alumni of the professional school.  Shop access is free except to alumni who pay a small fee.  Our shop is not open to the public.
Wood crafts hardware such as hinges, catches, screws, screw eyes, and sawtooth hangers are just a few of the items we stock for your woordworking plans. With turn buttons, swivel hangers, hasps and shelf pegs, you are sure to find the hardware supplies that will fit your needs.  We also carry lamp supplies, wire, vinyl gloves, magnets, felt pads, and so much more. Check out our entire line of hardware and supplies!
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
"Wow this homemade creamer is even easier than all the others I seen because this one the ingredients are just whipped together and put in container and refridgate. The vanilla is so soothing and adds just that secial touch to your creamer. Take some to the office and share. Your co-workers will be asking you which creamer is this. Very easy to do."
Let’s take it up a notch and start building something more serious. This project may take more than just a few hours to complete, but the final item would be worth it as you can see in the image. It is a beautiful entryway table with drawers made entirely from scrap pallet wood. You can make one yourself by following the instructions from the picture.
Veneering and Marquetry.  Learn to skillfully select and apply different veneers   using traditional methods make use of hide glue and a specialty veneer hammer.  We’ll also train you in techniques for using cold glues, and to do vacuum bag veneering with flat or curved cauls. Marquetry – the art of is creating pictures in wood and veneer, is also included in these classes.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out! 

We have an array of home grade tools including a chop saw, contractors table saw, drill press, various sanders, planer, joiner, lathe, band saw, panel saw, scroll saw, and other various hand tools. In addition we also have a metal shop, blacksmith area, an industrial robot, various CNC machines, an indoor ventilation(paint) area, electronics lab, 3d printing area, pottery area, clean craft/sewing area. We are a nonprofit with about 200 members and about 30,000 sq. feet, membership is $40 a month and includes a small storage area along with 24 hour building access. Check out our website www.milwaukeemakerspace.org and come on down to our weekly meeting on Tuesday’s at 7pm, we’re the big red building behind McDonalds in beautiful Bayview. http://wiki.milwaukeemakerspace.org/equipment
Hi there, I'm glad that you are here. Firstly, let me introduce you that my name is Kevin Smith and I'm a coffee addicted guy, a blogger. Secondly, the reason why I create this website is to analyze what's the best products on the market with high quality and affordable price so that I make a decision to buy the right products for my family, friends and me. Thirdly, I just want to learn more about Home & Improvement Tools and Appliances so that I could improve my sweet little home.
We do the busy work — Instead of standing in line to use one of our planers, Lonnie and his assistant plane the lumber for the Woodworking Essentials project before your class begins. This is an important difference between our school and the others: because we plane the boards you’ll spend more of your valuable time learning the enjoyable and important stuff—such as cutting dovetails, learning to sharpen and use hand tools effectively, bandsawing and carving a leg or precisely fitting a drawer.

This course is focused on developing the skills that will allow you to start to find your voice as a furniture designer / maker. Design will be the consistent thread through the numerous projects of this class. We will take a hybrid approach to furniture making by blending traditional hand tool techniques with pragmatic use of woodworking machines. 
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
This course is focused on developing the skills that will allow you to start to find your voice as a furniture designer / maker. Design will be the consistent thread through the numerous projects of this class. We will take a hybrid approach to furniture making by blending traditional hand tool techniques with pragmatic use of woodworking machines. 
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!

The Penn Foster Career School Furniture and Cabinet Maker online program includes practical exercises and a Work Experience Option to give you hands-on training and field experience relative to your program and career goals. You’ll also receive a variety of tools and learning aids to help you through your cabinet design and woodworking classes, including a tape measure, combination square, T-bevel, hammer, chisel set, dovetail saw, c-clamp, and videos.
We mentor each student to develop the advanced skills needed to express their own inspired, distinctive style.  For example, we may explore the design nuances and practical considerations of working with specialized, exotic woods and surface textures, along with associated unique finishing techniques. We constantly seek those sweet, memorable moments when both instructor and student recognize the student’s shift into their next level of mastery.
With the right tools, you can crank one of these bad boys out in less than a day’s work. It’s definitely more of a niche item, but don’t be fooled into thinking that it’s not versatile! You can use one of these to display a bowling trophy, a prized-collectible action figure, a family photo that has to stand out from the rest, and even most foods that don’t taste like cake!
When you are gathering inspiration for barn door Plan, be sure to note the cost of the tools used in the plan. Barn door tools can often cost more than your actual door! But, there are many clever and affordable do it yourself tools options in the tutorials mentioned below! Let us explore some DIY Barn Door Tutorials. Just click on the blue text below and check some amazing fun Barn doors. They might be different from the one shown in above picture.
Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.

Most of our products are in stock waiting and ready to ship the day you order them (look for our green IN STOCK icon) – and if you purchase a PRO Membership, you get free standard shipping for an entire year. We guarantee satisfaction on your order and know you will find the best products when you shop with us! We aim to be the first company you call when you need woodworking or building products. Make us your go-to supplier!
But they had to start somewhere too right. If you’re looking to get into it, here some simple woodworking ideas that can get you started. There are a lot of cool projects about some easy wood ideas from wooden desks, shelves wooden clamps, trays and decorative articles to coffee table plans, rocking chairs wine holders, clocks, fences, wall designs, bird houses, cutlery, coasters and what not, that you can try as beginners and they tell you how to do it step by step.
teastore.com). To get the show on the road, freehand the tea bag, tag, and spoon designs, using our image as a guide, with Pebeo's Porcelaine fine-point marker ($4.82; dickblick.com). Don't worry if you make a mistake—the ink can be washed away for up to 72 hours. Allow at least 24 hours' drying time, then bake the items for 35 minutes in a 300°F oven. Let cool completely, and wash (the ink's dishwasher safe!) before brewing up a spot of Earl Grey.
Thinking my orders were now correct, I went to install the slides, and found you had sent me an odd number of Left/Right Blum drawer clips (they are sold in pairs. I ordered pairs. You sent me 5 right and 3 left). I emailed Teresa, personally, and guess what? No reply. So I called, and someone told me Teresa had quit. This new person apologized and said she'd send me a Left clip the same day.
Nine graduates of the Cabinet & Furniture Making program are among the community of woodworkers at the two-story Charlestown Furniture Makers shop, established in 2012 by David Ambler CF '11. "Like North Bennet Street School, one of the things we offer is a culture of excellence," explains David. "There's a real enjoyment being among people with shared interests in the valuing of craft."
Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.
Course Entry Points:  There is great value in moving through our series of courses with a cohesive cohort of peers and our goal is to support this by having published start dates for each session.  However, because the nature of the instruction is so individualized, MSF may make allowances for students who wish to enter mid-session.  For example, If a student wants to enter in week 3 of the 12-week session, we may allow their enrollment contingent on their willingness to work outside of structured class hours and receive individual tutoring.
Hand Tool Selection & Use:  In these classes we explore various hand tools such as chisels, hand planes, handsaws, etc. and train students how to use them safely and maintain them well. We go over various characteristics of different tools and make recommendations based on experience.  Students will learn how to select the perfect tool for the perfect result.
Wood crafts hardware such as hinges, catches, screws, screw eyes, and sawtooth hangers are just a few of the items we stock for your woordworking plans. With turn buttons, swivel hangers, hasps and shelf pegs, you are sure to find the hardware supplies that will fit your needs.  We also carry lamp supplies, wire, vinyl gloves, magnets, felt pads, and so much more. Check out our entire line of hardware and supplies! 

First, use a drill to make a 1/8-inch-wide hole halfway down into a new cork ($3.99 for 30; winemakingsuperstore.com). Next, twist off the top of a vintage trophy (typically a few bucks each at thrift shops and garage sales). Apply superglue to the underside of the trophy top's base and the screw that extends from it. Insert the screw into the cork and twist the pieces together until flush and a tight bond forms. Allow one hour of drying time before using your prize design.
The remaining tuition payment ($7,000.00) and materials deposit ($300.00) is due 45 days before the start date. Any unused materials deposit will be returned at the end of the course. You may use the materials deposit to buy books, finish, wood, fasteners, and hardware. Due to credit card processing fees, we kindly ask that students make this portion of the tuition payments by personal check, money order, or bank check.

We mentor each student to develop the advanced skills needed to express their own inspired, distinctive style.  For example, we may explore the design nuances and practical considerations of working with specialized, exotic woods and surface textures, along with associated unique finishing techniques. We constantly seek those sweet, memorable moments when both instructor and student recognize the student’s shift into their next level of mastery.


We have an array of home grade tools including a chop saw, contractors table saw, drill press, various sanders, planer, joiner, lathe, band saw, panel saw, scroll saw, and other various hand tools. In addition we also have a metal shop, blacksmith area, an industrial robot, various CNC machines, an indoor ventilation(paint) area, electronics lab, 3d printing area, pottery area, clean craft/sewing area. We are a nonprofit with about 200 members and about 30,000 sq. feet, membership is $40 a month and includes a small storage area along with 24 hour building access. Check out our website www.milwaukeemakerspace.org and come on down to our weekly meeting on Tuesday’s at 7pm, we’re the big red building behind McDonalds in beautiful Bayview. http://wiki.milwaukeemakerspace.org/equipment
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
With the right tools, you can crank one of these bad boys out in less than a day’s work. It’s definitely more of a niche item, but don’t be fooled into thinking that it’s not versatile! You can use one of these to display a bowling trophy, a prized-collectible action figure, a family photo that has to stand out from the rest, and even most foods that don’t taste like cake! 

I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.

Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.

This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.


By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.
1. Rearrange your furniture. This may sound simple, but rearranging furniture is a great (and free!) way to completely change the look and feel of your home. If you always find yourself climbing over an ottoman, move your couch back to create a passing lane. Is it too cramped? Try moving your side table to another room that's more spacious. Click here for more tips.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Industrial design degrees are similar to furniture design degrees. However, students working toward earning industrial design degrees don’t usually focus just on furniture. Instead, they focus on designing and building a number of different consumer products. Some of the areas that industrial design instructors might touch on may include toy design, automobile design, and product design.
Most of our products are in stock waiting and ready to ship the day you order them (look for our green IN STOCK icon) – and if you purchase a PRO Membership, you get free standard shipping for an entire year. We guarantee satisfaction on your order and know you will find the best products when you shop with us! We aim to be the first company you call when you need woodworking or building products. Make us your go-to supplier!
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Your kitchen is the heart of your home, the epicenter for hosting and the hub for masterful meals. When you first moved into your home, everything was new and matched to create a uniform and beautiful kitchen space. As the years have gone by, though, you've made changes, swapped out appliances, and now there's something off about your kitchen. Chances are, it's probably the cabinets. Your once beautiful cabinets have become old and musty, creating a wall-to-wall eyesore in your favorite room of the house. Luckily, there are some easy ways to freshen up those cabinets and bring some life back to your kitchen.
Carving a Fan for Your Next Piece of Furniture The Carved Fan in Furniture Carvings found on 18th furniture are sometimes an ostentatious display of vines and leaves which cover nearly every exposed surface of the chair or chest to which they’re applied. I’ve always had a greater appreciation for minimal amounts of carving that accentuate a furniture […]
Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.
×