Auditing:  MSF has an auditing policy that allows for students who have successfully completed a training level (Basic, Intermediate, Master-Level) to enroll again in the same level in order to deepen their mastery.  Auditing is available on a space available basis for 50% of the standard tuition.  Auditing students do not receive a second Certificate of Accomplishment.  Please note that auditing (for a reduced fee) is not available for individual Project & Skills Workshops that are not also part of the professional training (see Concurrent Classes).

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
There will be two instructors for this course. One of the school’s instructors will be there full time. The second instructor will change with each project so you are exposed to a wide range of aesthetics, techniques and approaches to furniture making. These will include local makers and designers including Jim Tolpin, Tom Dolese, Michael Hamilton, Seth Rolland, Jaap Romijn and Tim Lawson. Other makers from the Puget Sound area will share their experience with you. 
Course Entry Points:  There is great value in moving through our series of courses with a cohesive cohort of peers and our goal is to support this by having published start dates for each session.  However, because the nature of the instruction is so individualized, MSF may make allowances for students who wish to enter mid-session.  For example, If a student wants to enter in week 3 of the 12-week session, we may allow their enrollment contingent on their willingness to work outside of structured class hours and receive individual tutoring.

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!


Ben Hobbs has been building period reproduction furniture for nearly 30 years. After teaching high school math for 10 years, Ben's passion for early American furniture and architecture drew him into the shop in 1982. Since then, Ben has operated as a bespoke custom furniture maker reproducing fine early American pieces, focusing on Southern and local NC examples. After training all three of his sons to be accomplished furniture makers, Ben opened his shop doors in 1996 to train students in his woodworking school.
We offer top quality woodcraft products. When it comes to quality, dedication and a commitment to excellence we can't be beat! We have a large selection of online craft supplies for the hobbyist or the professional woodcrafter. We're dedicated to meet your craft and woodcraft products needs. Check out our online store and let us help you make your next woodcraft projects shine!
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
Prerequisites:  Each level (Basic, Intermediate, and Master-Level) is a prerequisite for the next.  However, students entering our Professional Training series can submit to a Skills Assessment by one of MSF’s instructors to determine if they may enter into the program and receive more advanced instruction without first satisfying previous training requirements.
Look at the bigger picture. Consider what happens during different months or times during the year. Think about what is going on in the other parts of your life. When is the best time for you to take on a new project, role or responsibility? Take into account other commitments that zap your energy. Do you have a sick parent, a spouse who travels all the time or young children who demand all of your available time and energy?

First, use a drill to make a 1/8-inch-wide hole halfway down into a new cork ($3.99 for 30; winemakingsuperstore.com). Next, twist off the top of a vintage trophy (typically a few bucks each at thrift shops and garage sales). Apply superglue to the underside of the trophy top's base and the screw that extends from it. Insert the screw into the cork and twist the pieces together until flush and a tight bond forms. Allow one hour of drying time before using your prize design. 

Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.
Paid Private or Shared Tutorials:  Students needing or wanting to receive private, customized instruction from a teacher in order to address particular challenges, keep up with the class or make up for absences, may arrange for Paid Private or Shared Tutorials during open shop time.  Tutorials are available on a space and instructor-available basis, and the fee will depend on the number of instructional hours requested and students sharing the instructor. Please contact us to arrange for your tutorial and we’ll quote the fee at that time.
Our offering includes brass plated butt hinges, continuous (�piano�) hinges, precision milled and extruded solid brass hinges for cabinets and furniture, traditional overlay and inset cabinet hinges in a number of finishes, Soss invisible hinges, cylinder hinges, European style cup hinges for face frame and frameless (panel) construction cabinets, and hinges for bi-fold door, angled door, thick door, molded edge door, overhead bin door, flap, tray and tabletop applications.

Tualatin, OR — October 1, 2014 — SawStop, LLC, the world leader in table saw safety, is celebrating 10 years of designing and manufacturing the world’s safest table saws. To commemorate the anniversary, between October 1 and December 31, 2014, in the United States and Canada each customer who purchases a new Industrial Cabinet Saw will receive over $200 in free […]
Woodworker's Supply is the expert's source for woodworking tools and hardware. We have the latest table saws, band saws, scroll saws, mortisers, jointers and planers for you to choose from. Looking for name brand cordless power tools or electric routers, router bits, and router accessories? We have a huge selection available. We represent the most respected brands on the market like Powermatic, DeWalt, Freud, Woodtek and many more. From traditional hand tools to high-tech digital measuring devices, we have what you need for the most intricate woodworking projects at woodworker.com.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
The Austin School of Furniture & Design is located at 3508 E. Cesar Chavez St. and shares space with the Splinter Group. Although the school has its own dedicated space, we are also a part of a larger shared warehouse full of makers and artists. ASFD and Splinter Group strongly believe in supporting the woodworking community, furthering the craft and making shop space and education more readily available and affordable for everyone.
Our Professional Training series targets students who feel a powerfully deep calling from within – one which compels them to seek out immersive opportunities that will transform them into skilled woodworking artists who become known for creating unique, divinely beautiful, wonderfully functional fine furniture.  Learn more about our Professional Training Courses here.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Each of these types of furniture design school options has its advantages and disadvantages. Traditional colleges and universities might be more easily accessible, for instance, but they may not offer truly focused design degree programs. Art, design and fashion institutes, on the other hand, are often more expensive, but they also usually have more internship and networking opportunities for aspiring furniture designers and artists.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
When you are gathering inspiration for barn door Plan, be sure to note the cost of the tools used in the plan. Barn door tools can often cost more than your actual door! But, there are many clever and affordable do it yourself tools options in the tutorials mentioned below! Let us explore some DIY Barn Door Tutorials. Just click on the blue text below and check some amazing fun Barn doors. They might be different from the one shown in above picture.
Open Shop Availability:  Open shop time is held on most  Mondays-Fridays 4:30pm to at least 8:00pm.  Weekend shop time is usually from 9:00am-6:00pm unless a class is in session – please see the class schedule for specific weekend shop availability.  Shop space is allocated on a space-available basis first to currently enrolled students, students enrolled for private mentorship sessions, and to instructors; and then to alumni of the professional school.  Shop access is free except to alumni who pay a small fee.  Our shop is not open to the public.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
The Penn Foster Career School Furniture and Cabinet Maker online program includes practical exercises and a Work Experience Option to give you hands-on training and field experience relative to your program and career goals. You’ll also receive a variety of tools and learning aids to help you through your cabinet design and woodworking classes, including a tape measure, combination square, T-bevel, hammer, chisel set, dovetail saw, c-clamp, and videos.
Hi there, I'm glad that you are here. Firstly, let me introduce you that my name is Kevin Smith and I'm a coffee addicted guy, a blogger. Secondly, the reason why I create this website is to analyze what's the best products on the market with high quality and affordable price so that I make a decision to buy the right products for my family, friends and me. Thirdly, I just want to learn more about Home & Improvement Tools and Appliances so that I could improve my sweet little home.
Woodworker’s Hardware is your one-stop online woodworker’s store for all of your woodworker's supplies.  Shop for everything you need to start and finish your woodworking projects.  Find a huge selection of hardware products including drawer slides, barn door hardware, lazy susans, kitchen cabinet hardware & accessories, and furniture hardware.  We stock thousands of door and cabinet hardware and accessories like knobs, pulls, and hooks for kitchens, bathrooms, and closets. As one of the leading online kitchen cabinet hardware suppliers, shop for soft-close ball bearing drawer slides from top-rated brands like KV and Blum. Check out our sales page for our best offers! Our fully stocked warehouse full of woodworker’s supplies ensures shipping in 24 business hours.
This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com.
All About Wood:  What are the different characteristics of wood – how does each move, shrink, expand, respond – and how does one allow for all of this in design and building?  How do different woods respond to tooling and machinery?  What are practical considerations in selecting woods for different types of furniture – along with aesthetic considerations, finishing characteristics, issues with availability, cost, purchase sources, and environmental considerations?
Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.

There are a few common types of degrees that most furniture design schools offer. Associate and bachelor’s degrees typically enable students to learn the fundamentals of furniture design, as well as advanced techniques. These types of degrees usually take students two or four years to complete. Students who are looking for a more in depth education or those who would like to focus on a specific aspect of furniture design may want to consider earning a Master’s degree in furniture design.


Our customers tell us they value our large selection of over 24,000+ woodworking tools and supplies. We provide multiple ordering options, fast shipping and responsive and no-hassle customer service. Our expert staff is available to assist you in your woodworking tool and supply needs, so please contact us with any questions at 800-645-9292. If you are a pro woodworker, please call our Pro Hotline at 800-321-9841 to sign-up for our pro program.
(From beginners to advanced… Arts and crafts furniture project oriented, 2 day classes to 10 day classes, Bow arm morris chair, end tables, finishing class, tall clock classes, kitchen cabinet classes, advanced cabinetmaking class, power tool classes and hybrid classes, and much more. Limited to 4 student maximum except finishing class will take I 6.)
Nine graduates of the Cabinet & Furniture Making program are among the community of woodworkers at the two-story Charlestown Furniture Makers shop, established in 2012 by David Ambler CF '11. "Like North Bennet Street School, one of the things we offer is a culture of excellence," explains David. "There's a real enjoyment being among people with shared interests in the valuing of craft."

By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.
Nightstands are nearly almost as important as the headboard of a mattress when it comes to a bedroom. They are absolutely perfect for placing lamps and novels for that late night reading, an alarm clock to remind you when it should be time to start your day, and for that nice, coaxing mug of sleepy time tea when you decide it is time to start winding down.

From making your own picture frames to constructing your own furniture, woodwork is one area where many DIY’ers cut their teeth and where many skilled professionals make an honest living. Whether you’re wet behind the ears or a seasoned expert at the craft, here’s a roundup of handy new woodworking tools to consider for your next equipment purchase. PocketJig200 The […]


The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here

Nine graduates of the Cabinet & Furniture Making program are among the community of woodworkers at the two-story Charlestown Furniture Makers shop, established in 2012 by David Ambler CF '11. "Like North Bennet Street School, one of the things we offer is a culture of excellence," explains David. "There's a real enjoyment being among people with shared interests in the valuing of craft."
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.
There will be two instructors for this course. One of the school’s instructors will be there full time. The second instructor will change with each project so you are exposed to a wide range of aesthetics, techniques and approaches to furniture making. These will include local makers and designers including Jim Tolpin, Tom Dolese, Michael Hamilton, Seth Rolland, Jaap Romijn and Tim Lawson. Other makers from the Puget Sound area will share their experience with you. 
All images and tutorials on this blog are copyrighted material.Please contact me if you would like to borrow any media (photos, video or audio files), tutorials, or ideas from this blog. 99% of the time I would be happy to allow you to use one photo with appropriate credit and link back to PrettyHandyGirl.com (preferably to the same post it was borrowed from.) I can be contacted via email: PrettyHandyGirl (at) gmail.com.
Thinking my orders were now correct, I went to install the slides, and found you had sent me an odd number of Left/Right Blum drawer clips (they are sold in pairs. I ordered pairs. You sent me 5 right and 3 left). I emailed Teresa, personally, and guess what? No reply. So I called, and someone told me Teresa had quit. This new person apologized and said she'd send me a Left clip the same day.
Masterpiece School of Furniture which operated in Fort Bragg, California for nine successful years as a woodworking and furniture school has relocated into a 6,000 square-foot, 1930’s building remodeled specifically for optimum teaching and project work.  MSF is located in downtown Marysville, CA, on the Yuba River, 40 miles north of Sacramento.  Learn more about MSF here.
This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills.

"Wow this homemade creamer is even easier than all the others I seen because this one the ingredients are just whipped together and put in container and refridgate. The vanilla is so soothing and adds just that secial touch to your creamer. Take some to the office and share. Your co-workers will be asking you which creamer is this. Very easy to do."
×