Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.


Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.

TechShop is a playground for creativity. Part fabrication and prototyping studio, part hacker-space and part learning center, TechShop provides access to over $1 million worth of professional equipment and software. We offer comprehensive instruction and expert staff to ensure you have a safe, meaningful and rewarding experience. Most importantly, at TechShop you can explore the world of making in a collaborative and creative environment.
3.Rearrange the bookshelf. Reorganizing the bookshelf will easily make an entire room look more styled and polished, and you don't even have to get rid of anything. One tip is to arrange your books so they look like a smooth landscape of rolling hills. Put the tallest in the middle and fan out to the smallest or create multiple peaks (as long as the books flow together) or lay a few books on their side and stack them like a pyramid. For seven more tips to a visually organized bookshelf, click here.

Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
We offer great projects — Our projects are beautifully-proportioned, attractive designs that you’re sure to be proud of as you create heirloom furniture. In fact, many people say that we offer some of the best woodworking projects in the USA! Lonnie personally custom-designs each furniture project to combine classic good looks with time-tested mortise-and-tenon and dovetail joints. These joints are considered the hallmark of fine craftsmanship. Lonnie also designs each woodworking project to maximize your learning experience so that you take new home techniques and skills.
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
By completing a form on this website, you will be able to receive email correspondence from Canadian Woodworking.   These emails may include information on upcoming events or special offers for subscribers. If you do not wish to receive email correspondence please email orderdesk@canadianwoodworking.com  and ask to be removed from our email list. Every email that we send to you will include an "opt-out" from receiving future email correspondence. 
"Wow this homemade creamer is even easier than all the others I seen because this one the ingredients are just whipped together and put in container and refridgate. The vanilla is so soothing and adds just that secial touch to your creamer. Take some to the office and share. Your co-workers will be asking you which creamer is this. Very easy to do."
Nine graduates of the Cabinet & Furniture Making program are among the community of woodworkers at the two-story Charlestown Furniture Makers shop, established in 2012 by David Ambler CF '11. "Like North Bennet Street School, one of the things we offer is a culture of excellence," explains David. "There's a real enjoyment being among people with shared interests in the valuing of craft."
Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.
Learn woodworking techniques and create beautiful pieces of furniture with Penn Foster Career School’s Furniture and Cabinet Maker program. Learn the skills that can help put you on a path toward working for a furniture or cabinet retail store, manufacturer, repair/refinishing shop, home improvement store, or even opening your own woodworking shop and specialize in custom cabinet and furniture making. At Penn Foster Career School, you can complete the Furniture and Cabinet Maker program in as little as four months – all while you train at home at a pace that's right for you.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.
×