Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!

Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.
The Austin School of Furniture & Design is located at 3508 E. Cesar Chavez St. and shares space with the Splinter Group. Although the school has its own dedicated space, we are also a part of a larger shared warehouse full of makers and artists. ASFD and Splinter Group strongly believe in supporting the woodworking community, furthering the craft and making shop space and education more readily available and affordable for everyone.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Learn woodworking techniques and create beautiful pieces of furniture with Penn Foster Career School’s Furniture and Cabinet Maker program. Learn the skills that can help put you on a path toward working for a furniture or cabinet retail store, manufacturer, repair/refinishing shop, home improvement store, or even opening your own woodworking shop and specialize in custom cabinet and furniture making. At Penn Foster Career School, you can complete the Furniture and Cabinet Maker program in as little as four months – all while you train at home at a pace that's right for you.
Industrial design degrees are similar to furniture design degrees. However, students working toward earning industrial design degrees don’t usually focus just on furniture. Instead, they focus on designing and building a number of different consumer products. Some of the areas that industrial design instructors might touch on may include toy design, automobile design, and product design.
×