Uses Sisters High School shop (2000+ SqFt). SHS shop has seven workbenches with quick release vises and additional work/assembly tables. Stationary tools include a SawStop tablesaw, two bandsaws, jointer, planer, 2 drill press’s, a wide belt sander, belt and disk sanders and a grinder. Portable powertools include circular and jig saws, drills, plate joiner, routers, ro sanders. Handtools (provided by the instructor) include measuring and marking tools a variety of handsaws, bench, block, scraping and joinery planes, rasps & files, chisels, gouges and sharpening equipment. Topics include SAFETY, wood selection, tool buying and maintenance, sharpening, joinery and finishing. One instructor. Class size is limited to fourteen students.


Ben Hobbs has been building period reproduction furniture for nearly 30 years. After teaching high school math for 10 years, Ben's passion for early American furniture and architecture drew him into the shop in 1982. Since then, Ben has operated as a bespoke custom furniture maker reproducing fine early American pieces, focusing on Southern and local NC examples. After training all three of his sons to be accomplished furniture makers, Ben opened his shop doors in 1996 to train students in his woodworking school.
Auditing:  MSF has an auditing policy that allows for students who have successfully completed a training level (Basic, Intermediate, Master-Level) to enroll again in the same level in order to deepen their mastery.  Auditing is available on a space available basis for 50% of the standard tuition.  Auditing students do not receive a second Certificate of Accomplishment.  Please note that auditing (for a reduced fee) is not available for individual Project & Skills Workshops that are not also part of the professional training (see Concurrent Classes).
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
To assemble your own, cut velvet ribbon ($1.59 per yard; mjtrim.com) into nine-inch lengths. Purchase ribbon clamps the same width as your ribbon (from $1.50 per 10 pack; artfire.com), then use flat-nose jewelry pliers to affix clamps to both ends of each ribbon. Finish by attaching charms, trinkets, or vintage earrings (from 25 cents each; eebeads.com) to the clamps with jump rings ($5.55 per 100 pack; amazon.com).
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
We will review the history of furniture making in America with a visit to the Decorative Arts Collection at the Museum of Fine Arts in Boston and have Cambridge artist/craftsman Mitch Ryerson show us his work and talk about design process. Students will learn traditional woodworking techniques beginning with the use of hand tools, power tools and finally woodworking machines.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!

I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.


By video tutorial, you will get step by step process instructions of making a nice wooden folding sling chair from scratch. However, my first wooden chair was not the best one, but it was good enough to motivate me to make some more folding chairs like this one. If I can make this, you too can make one yourself. You can browse the internet for more folding sling chairs ideas and start making one now.
Toy-making was a special occupation of the the School's former kindergarten program in its earliest decades. The training offered young, mostly poor children not only brand new toys but also a set of usable skills. Today, with support from Thos. Moser, NBSS reflects on this legacy with a limited edition of 10 "Little Folks" Rockers lovingly handmade by School artisans. These charming collectors' items will benefit the Toys for Tots program, bringing joy and new toys to less fortunate children at Christmas.
"Wow this is a great tutorial on how to make your own mayo with some good suggestions too and even different things you can use for flavors and even an eggless one. I did not know it was so easy to make and you can control and make sure there is no chemicals in it. Bring some out in your container with your name on label for those sandwiches and watch people be impressed and think you are a genius."
As Chief Creative Officer and Founding Partner at Brit + Co, Anjelika Temple brings her voracious consumption of all things creative and colorful to DIY projects, geeky gadgetry finds and more. When she's not DIY-ing her heart out, you'll find her throwing dinner parties with friends or adventuring with her husband David, their daughter Anokhi, and their silly dog Turkey.

We all know people who ignore all of this advice and yet seem to prosper and achieve wonderful success anyway, but they are usually the exception, not the rule. For most of us, this habitual tendency to force our bodies and our brains into patterns of working that undermine our productivity result in achieving less than desired results and adding more stress to our already overburdened lives.
The owners, webmasters, administrators, authors and editors, expressly disclaim all and any liability to any person, whether a user of this website or not, in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance, whether whole or partial, upon the whole or any part of the contents of this website. Please exercise caution when working with any tools or machinery. Follow common safety rules and precautions as outlined in any manuals related to the equipment being used. If advice or other expert assistance is required, the services of a competent professional person should be sought.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.
Small class sizes — We’re NOT the largest woodworking school in the USA–and that is a big advantage for you! You’ll received plenty of personalized attention and instruction because we only accept nine people in our Woodworking Essentials Classes. Many of our advanced woodworking courses are limited to just six people. Additionally, we have some of the most motivated and best woodworkers in the USA here –which makes the class composition fun as well as inspirational!
If you bought this superb polished table in a store, it would cost you a fortune, but our detailed instructions will help you make one for less than $100. And it looks like highly polished stone, but no-one would know it’s actually made from concrete with a wooden base. Also, you can embellish the top with leaf prints, like the table shown here, or personalize it with glass or mosaic tiles or imprints of seashells.
This course is focused on developing the skills that will allow you to start to find your voice as a furniture designer / maker. Design will be the consistent thread through the numerous projects of this class. We will take a hybrid approach to furniture making by blending traditional hand tool techniques with pragmatic use of woodworking machines. 
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
Auditing:  MSF has an auditing policy that allows for students who have successfully completed a training level (Basic, Intermediate, Master-Level) to enroll again in the same level in order to deepen their mastery.  Auditing is available on a space available basis for 50% of the standard tuition.  Auditing students do not receive a second Certificate of Accomplishment.  Please note that auditing (for a reduced fee) is not available for individual Project & Skills Workshops that are not also part of the professional training (see Concurrent Classes).

Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.
This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills.
Students enrolled in the Furniture and Cabinet Maker Career Diploma Program are eligible for discounted rates for the Woodworkers Guild of America premium online how-to videos. This video resource site can serve as a supplement to your furniture and cabinetry program, but is not required to complete your coursework. Learn more about this offer here.
By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.
Wortheffort is a dedicated woodworking school . A place to inspire, educate and motivate new artisans in this craft. We have afterschool programs, evening classes and long weekend classes targeting all skill ranges. Starting out we’ll specialize in hand tool and basic machinery education but hope to quickly expand into carving, turning, scrolling and sculpting. We also have a YouTube Channel and Facebook page.
Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner. 

We do the busy work — Instead of standing in line to use one of our planers, Lonnie and his assistant plane the lumber for the Woodworking Essentials project before your class begins. This is an important difference between our school and the others: because we plane the boards you’ll spend more of your valuable time learning the enjoyable and important stuff—such as cutting dovetails, learning to sharpen and use hand tools effectively, bandsawing and carving a leg or precisely fitting a drawer.
Most of our products are in stock waiting and ready to ship the day you order them (look for our green IN STOCK icon) – and if you purchase a PRO Membership, you get free standard shipping for an entire year. We guarantee satisfaction on your order and know you will find the best products when you shop with us! We aim to be the first company you call when you need woodworking or building products. Make us your go-to supplier!
By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post. 

Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
Ben Hobbs has been building period reproduction furniture for nearly 30 years. After teaching high school math for 10 years, Ben's passion for early American furniture and architecture drew him into the shop in 1982. Since then, Ben has operated as a bespoke custom furniture maker reproducing fine early American pieces, focusing on Southern and local NC examples. After training all three of his sons to be accomplished furniture makers, Ben opened his shop doors in 1996 to train students in his woodworking school.
By video tutorial, you will get step by step process instructions of making a nice wooden folding sling chair from scratch. However, my first wooden chair was not the best one, but it was good enough to motivate me to make some more folding chairs like this one. If I can make this, you too can make one yourself. You can browse the internet for more folding sling chairs ideas and start making one now.
“Going to the furniture making evening class was the highlight of my week (and I wasn't the only person on the course to say that!) Emma was really brilliant at sharing her knowledge and experience to help guide us all through the tricky process of hand-making furniture, and thanks to her we all managed to make something we were proud to take home”   -    Kay Parnell, Student.

We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Hanging planters are a big hit nowadays so don't let this opportunity of building your own DIY hanging planter pass! Learn the step-by-step instructions how to work a jigsaw and make this stunning planter to hang in your home to complement your furniture. You can hang it above your coffee table or put in flowers as a Valentine’s Day or Mother's Day gift for your loved one.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here

We have an array of home grade tools including a chop saw, contractors table saw, drill press, various sanders, planer, joiner, lathe, band saw, panel saw, scroll saw, and other various hand tools. In addition we also have a metal shop, blacksmith area, an industrial robot, various CNC machines, an indoor ventilation(paint) area, electronics lab, 3d printing area, pottery area, clean craft/sewing area. We are a nonprofit with about 200 members and about 30,000 sq. feet, membership is $40 a month and includes a small storage area along with 24 hour building access. Check out our website www.milwaukeemakerspace.org and come on down to our weekly meeting on Tuesday’s at 7pm, we’re the big red building behind McDonalds in beautiful Bayview. http://wiki.milwaukeemakerspace.org/equipment
×