Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.

Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
These charming accessories don't require any special tools to create. We simply gathered up four key rings and strung on: a brass cow tag, a plastic toy calf, a two-inch wooden printing block, and a couple vintage skeleton keys. A key ring can loop directly through the holes of the cow tag and skeleton keys; for the calf and printing block, just center and screw in a metal eye hook with your hands, then link the key ring through (key rings, $2.17 for 25; 1" diam.; eye hooks, 59 cents for 20; ⅝"; zorotools.com). For similar fobs, head to Michaels for the calf figurine ($2.99; michaels.com for stores), and search Etsy or eBay for tags, blocks, and keys (from $3 each).

The Lead Instructor for the course is Aled Lewis. You can see Fine Woodworking's video about Aled here. For each project, Aled is joined by a co-teacher who specializes in the relevant skills. The following list is subject to change. Most of the instructors have websites which you can visit for more extensive views of their work. See the list of instructors here.
Prerequisites:  Each level (Basic, Intermediate, and Master-Level) is a prerequisite for the next.  However, students entering our Professional Training series can submit to a Skills Assessment by one of MSF’s instructors to determine if they may enter into the program and receive more advanced instruction without first satisfying previous training requirements.
×