Take just a few minutes to look back at how your days and weeks have been unfolding. What time of the day are you the most focused? Do you prefer to be more social at certain times of the day? Do you have difficulty concentrating after lunch or are you energized? Are there days when you can’t seem to sit still at your desk and others when you could work on the same project for hours? 

A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
Veneering and Marquetry.  Learn to skillfully select and apply different veneers   using traditional methods make use of hide glue and a specialty veneer hammer.  We’ll also train you in techniques for using cold glues, and to do vacuum bag veneering with flat or curved cauls. Marquetry – the art of is creating pictures in wood and veneer, is also included in these classes.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.
The Manufactory is a 17,000 sq. ft. Makerspace, the ultimate workshop. It is chock full of a wide variety of equipment that can be used to build almost anything you can dream. For a modest membership fee you gain access to a clean, safe work environment and tools that are rarely available in one place. We have a metal shop, wood shop, welding, plastics, laser engravers, textiles, 3D printing and more. The centerpiece of our wood shop is a 4′ x 8’+ CNC router. The shop is also equipped with a complete collection of woodworking machinery, jigs, etc.
Milking and/or Faking an Accent for all it’s Worth.  Have you ever noticed that craftspeople with foreign accents are automatically assumed to be old-world artists worthy of obscenely large fees?  In this class, we will help you make the most of your foreign accent, or teach you how to fake one convincingly so that you can take advantage of these silly stereotypes and command 50-200% more for your work/commissions.
Look at the bigger picture. Consider what happens during different months or times during the year. Think about what is going on in the other parts of your life. When is the best time for you to take on a new project, role or responsibility? Take into account other commitments that zap your energy. Do you have a sick parent, a spouse who travels all the time or young children who demand all of your available time and energy?
The Penn Foster Career School Furniture and Cabinet Maker online program includes practical exercises and a Work Experience Option to give you hands-on training and field experience relative to your program and career goals. You’ll also receive a variety of tools and learning aids to help you through your cabinet design and woodworking classes, including a tape measure, combination square, T-bevel, hammer, chisel set, dovetail saw, c-clamp, and videos.
See the Light: Abundant windows and glass-paned doors allow sunlight to pour inside. The seamless transition between indoors and out makes the room appear larger. Open up a tight kitchen with floating shelves. While they won’t hide toasters and coffeemakers, they’re a sleek alternative to upper cabinetry, which often overwhelms a tiny space. | CoastalLiving.comSee the Light: Abund
Having swing in your own home, yard or garden can be so de-stressing and be relaxing a thing to enjoy, that doesn’t matter you have a big yard or patio, or vacant porch. Kids will surely fall in love with this swing porch and love playing on a breezy day. Even, adults also do relax and enjoy a quite morning coffee, or just being embraced by the sun in the swing.
MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this email to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.
The application process for Furniture Making opens 9 months in advance of the course start date. There is no fee for applying! Once you apply, we will schedule a brief phone interview to get a better sense of your woodworking experience and make sure the class is a good fit for you. Accepted applicants will be invited to register. We ask for a deposit of $200 at the time of registration to ensure your place in the class. 
Toy-making was a special occupation of the the School's former kindergarten program in its earliest decades. The training offered young, mostly poor children not only brand new toys but also a set of usable skills. Today, with support from Thos. Moser, NBSS reflects on this legacy with a limited edition of 10 "Little Folks" Rockers lovingly handmade by School artisans. These charming collectors' items will benefit the Toys for Tots program, bringing joy and new toys to less fortunate children at Christmas.
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.
By completing a form on this website, you will be able to receive email correspondence from Canadian Woodworking.   These emails may include information on upcoming events or special offers for subscribers. If you do not wish to receive email correspondence please email orderdesk@canadianwoodworking.com  and ask to be removed from our email list. Every email that we send to you will include an "opt-out" from receiving future email correspondence.  

This Privacy Policy covers CanadianWoodworking.com's treatment of personally identifiable information that CanadianWoodworking.com collects when you are on the CanadianWoodworking.com site, and when you use CanadianWoodworking.com's services. This policy also covers CanadianWoodworking.com's treatment of any personally identifiable information that CanadianWoodworking.com's business partners share with CanadianWoodworking.com. 

This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
Training Length & Times:  Each professional training session (Fall, Winter, Spring) is 12 weeks in length and may include students at the Basic, Intermediate, or Master level. Our entire program takes 9 months to complete and so we recommend that students enroll in 3 consecutive sessions in order to complete the full curriculum.  Students attend small-group lectures, receive individualized instruction, and complete specific projects that are designed for their experience level.  Class instruction is available Mondays-Fridays from 9:00am-4:30pm with a 1-hour break for lunch.  The shop remains available for independent student work from 4:30pm to at least 8:00pm on most days.  The school is closed on holidays and there is a break between sessions and over part of the summer.  See our current schedule for specific session dates.
“Going to the furniture making evening class was the highlight of my week (and I wasn't the only person on the course to say that!) Emma was really brilliant at sharing her knowledge and experience to help guide us all through the tricky process of hand-making furniture, and thanks to her we all managed to make something we were proud to take home”   -    Kay Parnell, Student.
MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this email to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary. 

Finishing:  It’s important to know how to select the right finish for the job and wood.  We train students in surface and material preparation, and in hand applied finishes such as oil, shellac, and varnishes.  Classes include selecting color and applying stains.  Specialty finishes such as French polishing are also covered along with training in how to use tools for finishing work and the proper use of fillers.
Veneering and Marquetry.  Learn to skillfully select and apply different veneers   using traditional methods make use of hide glue and a specialty veneer hammer.  We’ll also train you in techniques for using cold glues, and to do vacuum bag veneering with flat or curved cauls. Marquetry – the art of is creating pictures in wood and veneer, is also included in these classes.
Personally identifying information is information that can be used to identify who you are such as: name, mailing address, email address. To enter certain areas of the site, you will be required to register and provide information about yourself. This information is for the purposes of Canadian Woodworking and helps us to tailor the site to best meet the needs of our audience. 
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Turning:  Turning is an art in and of itself.  In these classes, students are mentored in how to choose and work with the perfect wood to get the perfect turning result.  We teach wet and dry wood work, specialty tool use such as lathes and skew chisels, and how to make custom tools for specific projects.  Techniques for spindle-work, hollow-end grain work, faceplate turning, and milling will be covered. We address special joinery considerations and precision fitting parts.
When you take a class with Lonnie you’ll receive lots of personal attention and instruction. You won’t get lost in a large crowd and you won’t have to “take a number” to get the help that you need (and let’s face it, isn’t that why you’re taking a woodworking class—to receive instruction?). Whether it’s carving a claw-and-ball foot, sawing a dovetail, creating decorative inlay, or sharpening a plane, Lonnie will demonstrate it personally to you at your bench. As a result of our small furniture making classes, you’ll learn more skills and have a more enjoyable experience.
Take just a few minutes to look back at how your days and weeks have been unfolding. What time of the day are you the most focused? Do you prefer to be more social at certain times of the day? Do you have difficulty concentrating after lunch or are you energized? Are there days when you can’t seem to sit still at your desk and others when you could work on the same project for hours?
With the right tools, you can crank one of these bad boys out in less than a day’s work. It’s definitely more of a niche item, but don’t be fooled into thinking that it’s not versatile! You can use one of these to display a bowling trophy, a prized-collectible action figure, a family photo that has to stand out from the rest, and even most foods that don’t taste like cake!
Training Length & Times:  Each professional training session (Fall, Winter, Spring) is 12 weeks in length and may include students at the Basic, Intermediate, or Master level. Our entire program takes 9 months to complete and so we recommend that students enroll in 3 consecutive sessions in order to complete the full curriculum.  Students attend small-group lectures, receive individualized instruction, and complete specific projects that are designed for their experience level.  Class instruction is available Mondays-Fridays from 9:00am-4:30pm with a 1-hour break for lunch.  The shop remains available for independent student work from 4:30pm to at least 8:00pm on most days.  The school is closed on holidays and there is a break between sessions and over part of the summer.  See our current schedule for specific session dates.
The remaining tuition payment ($7,000.00) and materials deposit ($300.00) is due 45 days before the start date. Any unused materials deposit will be returned at the end of the course. You may use the materials deposit to buy books, finish, wood, fasteners, and hardware. Due to credit card processing fees, we kindly ask that students make this portion of the tuition payments by personal check, money order, or bank check.

Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
Blogger Brittany Moser of darkroomanddearly.com made these Polaroid-inspired drink rests from color photos and square tiles (a steal at 15 cents apiece). First, trim a photo to 3 3/4"W x 3 1/4"H. Using a foam brush, spread Mod Podge on the back of the image; then position it on a tile, leaving a 1/4-inch border at the top and sides, and a 3/4-inch border at the bottom. Let dry for 30 minutes. Spread Mod Podge over the photo and exposed tile borders and let dry for one hour; repeat two to three more times. Spray with clear sealant and let dry for 24 hours. Finally, affix adhesive felt pads to the underside corners of your picture-perfect tiles.
Nightstand table plans have everything you need to create a bedside table to keep every needy thing at reach at night time. This Nigh Stand plan is quite different in design from the most of the other plans. This stand has not only the three regular drawers but also having a hidden drawer that uses a secret locking mechanism to keep contents securely.
Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
Learn woodworking techniques and create beautiful pieces of furniture with Penn Foster Career School’s Furniture and Cabinet Maker program. Learn the skills that can help put you on a path toward working for a furniture or cabinet retail store, manufacturer, repair/refinishing shop, home improvement store, or even opening your own woodworking shop and specialize in custom cabinet and furniture making. At Penn Foster Career School, you can complete the Furniture and Cabinet Maker program in as little as four months – all while you train at home at a pace that's right for you. 

Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
Work Study:  Students may apply for our Work Study option.   In return for acting as Shop Monitor during open shop periods, MSF will reduce the student’s tuition.  Shop monitors must be present in the shop during assigned hours primarily to enhance safety (assigned hours will not conflict with class hours).  Among other responsibilities, Shop Monitors make sure policies are honored and are responsible for the leaving the shop in good order at the end of their shift.  If space is available, Monitors may use the shop to work on their own projects during their shifts.  Our preference is to award work study positions first to students experiencing financial hardship.  Please notify us if you are interested in work study .  For more information, see our Tuitions & Registration page.
×