"Homemade ketchup really! Never would have thought to make it myself but why not. You can control the ingredients you use and how much and so simple to make. Add some different spices each time and see what flavors you can come up with. Why not challenge your friends or family members to see who can make the best and then try them out on some food."
From making your own picture frames to constructing your own furniture, woodwork is one area where many DIY’ers cut their teeth and where many skilled professionals make an honest living. Whether you’re wet behind the ears or a seasoned expert at the craft, here’s a roundup of handy new woodworking tools to consider for your next equipment purchase. PocketJig200 The […]
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
After seeing this list of easy woodworking projects with step-by-step instructions, crafting projects made with wood isn't actually hard to start. If you have some wood, the proper hand tools, and a little know-how, for sure you can build one or twenty-two of these wooden project plans. They are the perfect stylish additions to your home and you will now have a collection which you can be proud of as your very own work. From planters to a picnic table, name it and you can build it!
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
Prerequisites:  Each level (Basic, Intermediate, and Master-Level) is a prerequisite for the next.  However, students entering our Professional Training series can submit to a Skills Assessment by one of MSF’s instructors to determine if they may enter into the program and receive more advanced instruction without first satisfying previous training requirements.
Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner. 

Prerequisites:  Each level (Basic, Intermediate, and Master-Level) is a prerequisite for the next.  However, students entering our Professional Training series can submit to a Skills Assessment by one of MSF’s instructors to determine if they may enter into the program and receive more advanced instruction without first satisfying previous training requirements.
I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
Turning:  Turning is an art in and of itself.  In these classes, students are mentored in how to choose and work with the perfect wood to get the perfect turning result.  We teach wet and dry wood work, specialty tool use such as lathes and skew chisels, and how to make custom tools for specific projects.  Techniques for spindle-work, hollow-end grain work, faceplate turning, and milling will be covered. We address special joinery considerations and precision fitting parts.
Uses Sisters High School shop (2000+ SqFt). SHS shop has seven workbenches with quick release vises and additional work/assembly tables. Stationary tools include a SawStop tablesaw, two bandsaws, jointer, planer, 2 drill press’s, a wide belt sander, belt and disk sanders and a grinder. Portable powertools include circular and jig saws, drills, plate joiner, routers, ro sanders. Handtools (provided by the instructor) include measuring and marking tools a variety of handsaws, bench, block, scraping and joinery planes, rasps & files, chisels, gouges and sharpening equipment. Topics include SAFETY, wood selection, tool buying and maintenance, sharpening, joinery and finishing. One instructor. Class size is limited to fourteen students.
There are a few common types of degrees that most furniture design schools offer. Associate and bachelor’s degrees typically enable students to learn the fundamentals of furniture design, as well as advanced techniques. These types of degrees usually take students two or four years to complete. Students who are looking for a more in depth education or those who would like to focus on a specific aspect of furniture design may want to consider earning a Master’s degree in furniture design.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
“Going to the furniture making evening class was the highlight of my week (and I wasn't the only person on the course to say that!) Emma was really brilliant at sharing her knowledge and experience to help guide us all through the tricky process of hand-making furniture, and thanks to her we all managed to make something we were proud to take home”   -    Kay Parnell, Student.

As with most websites, we do log web visits. This information, however, does not have a link to you personally. These logs help us understand the needs of our audience and the areas of our site that you do or do not find useful. When you simply browse our site, no personal information is being collected.  We may disclose this non-personal information to third parties such as sponsors, clients or advertisers.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
3.Rearrange the bookshelf. Reorganizing the bookshelf will easily make an entire room look more styled and polished, and you don't even have to get rid of anything. One tip is to arrange your books so they look like a smooth landscape of rolling hills. Put the tallest in the middle and fan out to the smallest or create multiple peaks (as long as the books flow together) or lay a few books on their side and stack them like a pyramid. For seven more tips to a visually organized bookshelf, click here.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
Look at the types of things you do each day…each week. What can you move around so that it’s a better fit for you? Can you suggest to your team that you schedule meetings for late morning if you can’t stand to be social first thing? Can you schedule detailed project work or highly creative tasks, like writing or designing when you are best able to focus? How about making sales calls or client meetings on days when you are the most social and leaving billing or reports until another time when you are able to close your door and do repetitive tasks.
The Lead Instructor for the course is Aled Lewis. You can see Fine Woodworking's video about Aled here. For each project, Aled is joined by a co-teacher who specializes in the relevant skills. The following list is subject to change. Most of the instructors have websites which you can visit for more extensive views of their work. See the list of instructors here. 

We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse. 

TechShop is a playground for creativity. Part fabrication and prototyping studio, part hacker-space and part learning center, TechShop provides access to over $1 million worth of professional equipment and software. We offer comprehensive instruction and expert staff to ensure you have a safe, meaningful and rewarding experience. Most importantly, at TechShop you can explore the world of making in a collaborative and creative environment.
There are a few common types of degrees that most furniture design schools offer. Associate and bachelor’s degrees typically enable students to learn the fundamentals of furniture design, as well as advanced techniques. These types of degrees usually take students two or four years to complete. Students who are looking for a more in depth education or those who would like to focus on a specific aspect of furniture design may want to consider earning a Master’s degree in furniture design.
Carving a Fan for Your Next Piece of Furniture The Carved Fan in Furniture Carvings found on 18th furniture are sometimes an ostentatious display of vines and leaves which cover nearly every exposed surface of the chair or chest to which they’re applied. I’ve always had a greater appreciation for minimal amounts of carving that accentuate a furniture […]
By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
Thinking my orders were now correct, I went to install the slides, and found you had sent me an odd number of Left/Right Blum drawer clips (they are sold in pairs. I ordered pairs. You sent me 5 right and 3 left). I emailed Teresa, personally, and guess what? No reply. So I called, and someone told me Teresa had quit. This new person apologized and said she'd send me a Left clip the same day.
Homeowners in San Francisco spend the most money on kitchen remodels out of the top 20 metro areas in the United States, averaging nearly $70,000 for a large kitchen. One of the most common design requests in newly remodeled or built kitchens is the installation of soft-closing hinges for cabinets and drawers. Hinges may seem like a minuscule detail in the grand scheme of kitchen design, but soft-closing hinges can make a big difference in the comfort and utility of your home.

I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
By posting on this site and forum, the poster grants to Canadian Woodworking Magazine/Website the unrestricted rights to use of the content of the post for any purpose, including, but not limited to, publishing the posted material, including images, in print or electronic form in a future issue or issues of Canadian Woodworking magazine or related Canadian Woodworking products, and to use the post for promotional purposes without further compensation, as well as the right to use the poster's name in a credit along with the post.

This course is focused on developing the skills that will allow you to start to find your voice as a furniture designer / maker. Design will be the consistent thread through the numerous projects of this class. We will take a hybrid approach to furniture making by blending traditional hand tool techniques with pragmatic use of woodworking machines. 
×