Open Shop Availability:  Open shop time is held on most  Mondays-Fridays 4:30pm to at least 8:00pm.  Weekend shop time is usually from 9:00am-6:00pm unless a class is in session – please see the class schedule for specific weekend shop availability.  Shop space is allocated on a space-available basis first to currently enrolled students, students enrolled for private mentorship sessions, and to instructors; and then to alumni of the professional school.  Shop access is free except to alumni who pay a small fee.  Our shop is not open to the public.

To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.


Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many

There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.


We offer top quality woodcraft products. When it comes to quality, dedication and a commitment to excellence we can't be beat! We have a large selection of online craft supplies for the hobbyist or the professional woodcrafter. We're dedicated to meet your craft and woodcraft products needs. Check out our online store and let us help you make your next woodcraft projects shine!
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Our Professional Training series targets students who feel a powerfully deep calling from within – one which compels them to seek out immersive opportunities that will transform them into skilled woodworking artists who become known for creating unique, divinely beautiful, wonderfully functional fine furniture.  Learn more about our Professional Training Courses here.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
Tualatin, OR — October 1, 2014 — SawStop, LLC, the world leader in table saw safety, is celebrating 10 years of designing and manufacturing the world’s safest table saws. To commemorate the anniversary, between October 1 and December 31, 2014, in the United States and Canada each customer who purchases a new Industrial Cabinet Saw will receive over $200 in free […]
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.

I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
Wortheffort is a dedicated woodworking school . A place to inspire, educate and motivate new artisans in this craft. We have afterschool programs, evening classes and long weekend classes targeting all skill ranges. Starting out we’ll specialize in hand tool and basic machinery education but hope to quickly expand into carving, turning, scrolling and sculpting. We also have a YouTube Channel and Facebook page.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
There are a few common types of degrees that most furniture design schools offer. Associate and bachelor’s degrees typically enable students to learn the fundamentals of furniture design, as well as advanced techniques. These types of degrees usually take students two or four years to complete. Students who are looking for a more in depth education or those who would like to focus on a specific aspect of furniture design may want to consider earning a Master’s degree in furniture design.

I placed another order in April for more slides. This time, they were not stacked together, but literally just thrown in a box with zero packing material. Heavy drawer slides just literally tossed loose into a box with no packing material. Obviously, they were also damaged. Again, I emailed, and got no reply. I called and spoke to Teresa, who sent me replacements. When I explained that I had emailed to no reply, she had me forward the email to her email address. She received my email and was able to find it in the info@... inbox, and expressed surprise that no one had replied to my earlier emails.
I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon. 

It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
Veneering and Marquetry.  Learn to skillfully select and apply different veneers   using traditional methods make use of hide glue and a specialty veneer hammer.  We’ll also train you in techniques for using cold glues, and to do vacuum bag veneering with flat or curved cauls. Marquetry – the art of is creating pictures in wood and veneer, is also included in these classes.
Ben Hobbs has been building period reproduction furniture for nearly 30 years. After teaching high school math for 10 years, Ben's passion for early American furniture and architecture drew him into the shop in 1982. Since then, Ben has operated as a bespoke custom furniture maker reproducing fine early American pieces, focusing on Southern and local NC examples. After training all three of his sons to be accomplished furniture makers, Ben opened his shop doors in 1996 to train students in his woodworking school.
Personally identifying information is information that can be used to identify who you are such as: name, mailing address, email address. To enter certain areas of the site, you will be required to register and provide information about yourself. This information is for the purposes of Canadian Woodworking and helps us to tailor the site to best meet the needs of our audience. 

"Wow this is a great tutorial on how to make your own mayo with some good suggestions too and even different things you can use for flavors and even an eggless one. I did not know it was so easy to make and you can control and make sure there is no chemicals in it. Bring some out in your container with your name on label for those sandwiches and watch people be impressed and think you are a genius."
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
Wortheffort is a dedicated woodworking school . A place to inspire, educate and motivate new artisans in this craft. We have afterschool programs, evening classes and long weekend classes targeting all skill ranges. Starting out we’ll specialize in hand tool and basic machinery education but hope to quickly expand into carving, turning, scrolling and sculpting. We also have a YouTube Channel and Facebook page.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many
Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​

The Lead Instructor for the course is Aled Lewis. You can see Fine Woodworking's video about Aled here. For each project, Aled is joined by a co-teacher who specializes in the relevant skills. The following list is subject to change. Most of the instructors have websites which you can visit for more extensive views of their work. See the list of instructors here.
Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors. 

Work Study:  Students may apply for our Work Study option.   In return for acting as Shop Monitor during open shop periods, MSF will reduce the student’s tuition.  Shop monitors must be present in the shop during assigned hours primarily to enhance safety (assigned hours will not conflict with class hours).  Among other responsibilities, Shop Monitors make sure policies are honored and are responsible for the leaving the shop in good order at the end of their shift.  If space is available, Monitors may use the shop to work on their own projects during their shifts.  Our preference is to award work study positions first to students experiencing financial hardship.  Please notify us if you are interested in work study .  For more information, see our Tuitions & Registration page.


Homeowners in San Francisco spend the most money on kitchen remodels out of the top 20 metro areas in the United States, averaging nearly $70,000 for a large kitchen. One of the most common design requests in newly remodeled or built kitchens is the installation of soft-closing hinges for cabinets and drawers. Hinges may seem like a minuscule detail in the grand scheme of kitchen design, but soft-closing hinges can make a big difference in the comfort and utility of your home.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.

Step 3: Place your lampshade upside down on a flat surface. Apply a line of hot glue along the length of one stick's back side, and adhere it to the lampshade, placing the notched handle end flush against the top edge (the ends of the sticks may extend past your shade's bottom edge). Repeat with remaining sticks, placing them side by side until the lampshade is covered. Finally, flip it over and position your shade on a pendant- or table-lamp base to really brighten a room.


Each of our facilities includes laser cutters, plastics and electronics labs, a machine shop, a wood shop, a metal working shop, a textiles department, welding stations and a waterjet cutter. Members have open access to design software, featuring the entire Autodesk Design Suite. Huge project areas with large work tables are available for completing projects and collaborating with others. Free coffee and fresh popcorn are always available for your enjoyment. We also offer a number of experience-driven corporate events developed specifically to bring teams together and engage them in the act of making.
Believe it or not, redecorating your home doesn't need to be a massive and expensive project. Simple touches like adding a decorative tray or changing your pillow cases can have dramatic effects. To help you get inspired, we pulled together 14 easy decorating ideas that will update your home without breaking your budget. In fact, most of these projects are completely free...and the rest weigh in at under $10.
By video tutorial, you will get step by step process instructions of making a nice wooden folding sling chair from scratch. However, my first wooden chair was not the best one, but it was good enough to motivate me to make some more folding chairs like this one. If I can make this, you too can make one yourself. You can browse the internet for more folding sling chairs ideas and start making one now.
LuxuryHomeStuff.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, LuxuryHomeStuff.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
"Homemade ketchup really! Never would have thought to make it myself but why not. You can control the ingredients you use and how much and so simple to make. Add some different spices each time and see what flavors you can come up with. Why not challenge your friends or family members to see who can make the best and then try them out on some food."
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.

The owners, webmasters, administrators, authors and editors, expressly disclaim all and any liability to any person, whether a user of this website or not, in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance, whether whole or partial, upon the whole or any part of the contents of this website. Please exercise caution when working with any tools or machinery. Follow common safety rules and precautions as outlined in any manuals related to the equipment being used. If advice or other expert assistance is required, the services of a competent professional person should be sought.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
LuxuryHomeStuff.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, LuxuryHomeStuff.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
​The plan tutorial includes images, diagrams, step-by-step instructions, and even a video to help you along the way. You can also go with some more bookcase design ideas. Browse the internet for more and we are also proving a link below to some more ideas to this plan. Select and build one of these free bookcase DIYs and you will have everything available easily that you need to get started creating a bookshelf for any room in your house.
Wanna make your own owl baskets in a hoot? How about other crafts using crochet? You don't have to worry about it being too difficult because of this list of fun & easy crochet patterns for beginners like you! Read on [https://diyprojects.com/17-amazing-crochet-patterns-for-be…/] or follow us on IG: http://instagram.com/diyprojectsdotcom for more fun DIY ideas. 😉

MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this email to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.
Part-time classes at ASFD are geared toward dedicated hobbyists and aspiring furniture makers. They are held evenings and weekends to cater to students’ full-time work schedules. Part-time classes may cover a range of topics, skills, and projects. Classes will vary in duration, skill-level, and styles. As the school grows, so to do the classes. Large comprehensive and project-based classes are now being offered.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Wanna make your own owl baskets in a hoot? How about other crafts using crochet? You don't have to worry about it being too difficult because of this list of fun & easy crochet patterns for beginners like you! Read on [https://diyprojects.com/17-amazing-crochet-patterns-for-be…/] or follow us on IG: http://instagram.com/diyprojectsdotcom for more fun DIY ideas. 😉
The owners, webmasters, administrators, authors and editors, expressly disclaim all and any liability to any person, whether a user of this website or not, in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance, whether whole or partial, upon the whole or any part of the contents of this website. Please exercise caution when working with any tools or machinery. Follow common safety rules and precautions as outlined in any manuals related to the equipment being used. If advice or other expert assistance is required, the services of a competent professional person should be sought.
6.Change your lightbulbs. Nothing is more frustrating than light bulbs burning out, especially because replacing them is one of those things you put on the to-do list and immediately forget about. Take the time to replace all of those lights for a brighter, happier space. In your bedroom or den, try opting for lower wattage lights (between 20- and 50-watts) to create a cozier and more romantic ambience. Here is a great guide to lighting your home.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
Open Shop Availability:  Open shop time is held on most  Mondays-Fridays 4:30pm to at least 8:00pm.  Weekend shop time is usually from 9:00am-6:00pm unless a class is in session – please see the class schedule for specific weekend shop availability.  Shop space is allocated on a space-available basis first to currently enrolled students, students enrolled for private mentorship sessions, and to instructors; and then to alumni of the professional school.  Shop access is free except to alumni who pay a small fee.  Our shop is not open to the public.
Prerequisites:  Each level (Basic, Intermediate, and Master-Level) is a prerequisite for the next.  However, students entering our Professional Training series can submit to a Skills Assessment by one of MSF’s instructors to determine if they may enter into the program and receive more advanced instruction without first satisfying previous training requirements.

Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.


Hi Liz. I am sorry you were having trouble unsubscribing to the newsletter. Your information has been updated. Your email address has been removed from our Woodworkers Guild of America E-Newsletter mailing list. Please allow up to 5 business days for your request to be completed. If you have any questions, please contact our customer service team at 1-855-253-0822.
×