Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.
Your kitchen is the heart of your home, the epicenter for hosting and the hub for masterful meals. When you first moved into your home, everything was new and matched to create a uniform and beautiful kitchen space. As the years have gone by, though, you've made changes, swapped out appliances, and now there's something off about your kitchen. Chances are, it's probably the cabinets. Your once beautiful cabinets have become old and musty, creating a wall-to-wall eyesore in your favorite room of the house. Luckily, there are some easy ways to freshen up those cabinets and bring some life back to your kitchen.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!

There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
Put your dusty encyclopedias to good use with this side table. To assemble, cut trim to form a box frame that fits snugly around one book, nail frame to the tabletop’s underside, and paint the top. Drill a hole the size of dowel through each book’s center add glue dowel to the center of the table's underside. Stack encyclopedias, lining up holes, and twisting (as shown). Skewer the dowel through the holes to attach the tabletop
I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
Wood crafts hardware such as hinges, catches, screws, screw eyes, and sawtooth hangers are just a few of the items we stock for your woordworking plans. With turn buttons, swivel hangers, hasps and shelf pegs, you are sure to find the hardware supplies that will fit your needs.  We also carry lamp supplies, wire, vinyl gloves, magnets, felt pads, and so much more. Check out our entire line of hardware and supplies!
TechShop is a playground for creativity. Part fabrication and prototyping studio, part hacker-space and part learning center, TechShop provides access to over $1 million worth of professional equipment and software. We offer comprehensive instruction and expert staff to ensure you have a safe, meaningful and rewarding experience. Most importantly, at TechShop you can explore the world of making in a collaborative and creative environment.
Wortheffort is a dedicated woodworking school . A place to inspire, educate and motivate new artisans in this craft. We have afterschool programs, evening classes and long weekend classes targeting all skill ranges. Starting out we’ll specialize in hand tool and basic machinery education but hope to quickly expand into carving, turning, scrolling and sculpting. We also have a YouTube Channel and Facebook page.
Attending a furniture design school provides a student with an opportunity to discover their craft, learn and develop design methods and techniques, master technical advancements in areas such as sustainability, and ultimately determine the trajectory of their career. Hands on experience is a vital element of the learning process, as is comprehensive knowledge of materials and their properties. The graduate leaves school with a portfolio showcasing their unique talents and abilities.
LuxuryHomeStuff.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, LuxuryHomeStuff.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Nightstands are nearly almost as important as the headboard of a mattress when it comes to a bedroom. They are absolutely perfect for placing lamps and novels for that late night reading, an alarm clock to remind you when it should be time to start your day, and for that nice, coaxing mug of sleepy time tea when you decide it is time to start winding down.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
6.Change your lightbulbs. Nothing is more frustrating than light bulbs burning out, especially because replacing them is one of those things you put on the to-do list and immediately forget about. Take the time to replace all of those lights for a brighter, happier space. In your bedroom or den, try opting for lower wattage lights (between 20- and 50-watts) to create a cozier and more romantic ambience. Here is a great guide to lighting your home.

Ben Hobbs has been building period reproduction furniture for nearly 30 years. After teaching high school math for 10 years, Ben's passion for early American furniture and architecture drew him into the shop in 1982. Since then, Ben has operated as a bespoke custom furniture maker reproducing fine early American pieces, focusing on Southern and local NC examples. After training all three of his sons to be accomplished furniture makers, Ben opened his shop doors in 1996 to train students in his woodworking school.
There are a few common types of degrees that most furniture design schools offer. Associate and bachelor’s degrees typically enable students to learn the fundamentals of furniture design, as well as advanced techniques. These types of degrees usually take students two or four years to complete. Students who are looking for a more in depth education or those who would like to focus on a specific aspect of furniture design may want to consider earning a Master’s degree in furniture design.
Some of the basic courses offered in furniture design schools often cover such subjects as furniture and industrial design history, along with design theory. Students will also usually be required to take courses that help them understand what makes a good quality piece of furniture. Other classes my cover furniture styles, market trends, and materials.
We will review the history of furniture making in America with a visit to the Decorative Arts Collection at the Museum of Fine Arts in Boston and have Cambridge artist/craftsman Mitch Ryerson show us his work and talk about design process. Students will learn traditional woodworking techniques beginning with the use of hand tools, power tools and finally woodworking machines.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Flip the towel right side down. To determine where to place the tabs, center a spatula atop one of the towel’s shorter ends, and use straight pins to mark the spatula’s width. Place a tab at each pinned point, slightly over- lapping the tabs with the top of the towel. Make sure that each tab’s closed side lines up with the pins and that the open sides face each other. Remove the pins, then topstitch both tabs in place. Repeat on the towel’s other short end.
Easy woodworking projects are a great way to test your DIY skill level. It's always such an accomplishment when you complete a DIY project you spent time and effort on. DIY woodworking projects can also be intimidating at first especially with all the hand tools you must use. Once you have all you need, however, from tools to a step-by-step guide, you can start making the designs more efficiently. If you're new to woodworking, continue reading below and find easy woodworking projects suited for any beginner.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!

Paid Private or Shared Tutorials:  Students needing or wanting to receive private, customized instruction from a teacher in order to address particular challenges, keep up with the class or make up for absences, may arrange for Paid Private or Shared Tutorials during open shop time.  Tutorials are available on a space and instructor-available basis, and the fee will depend on the number of instructional hours requested and students sharing the instructor. Please contact us to arrange for your tutorial and we’ll quote the fee at that time. 

Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
×