All it took for us to elevate a basic knife block ($25.95; cutleryandmore.com)? A pencil and some paint. Begin by spray-painting the block with two coats of Rustoleum's white semigloss ($4.19 for 12 ounces; amazon.com). Allow two hours of drying time between coats; then let them dry overnight. Next, lay the block faceup. Using the knives you plan to keep in the block, lay one utensil atop the block in a spot that reflects the blade's placement when stored; carefully trace the shape with a pencil. Repeat with the other three knives. Fill the inside of each shape with another paint color—we used Benjamin Moore's Clearspring Green ($6.49 for 16 ounces; benjaminmoore.com). Let dry for two hours , add a second coat, then let dry again before inserting the cutlery.
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
This class is open to woodworkers who would like to broaden their approach to furniture making. What do we mean by this? We think it means you are a person who has decided to commit to learning furniture making; is yearning to develop a finer sense of design; has already acquired some woodworking skills and has a strong sense of the limitations of your own knowledge and skills.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many
How often do you go to close a cabinet door or drawer and it slams shut, making a seriously loud noise and throwing the contents of the cabinet or drawer all about? If you're like the millions of people without soft-close hinges, then it probably happens more often than you'd like it to. Not to mention, the hip-bump technique to close a cabinet drawer usually results in a loud bang and that's like your go-to move. Luckily for you and everyone else who hates it when their cabinets slam shut, it's relatively easy to install soft-close hinges or dampers. But before you decide yes or no, take a minute to look over the benefits of installing some soft-close hardware for cabinets.
See the Light: Abundant windows and glass-paned doors allow sunlight to pour inside. The seamless transition between indoors and out makes the room appear larger. Open up a tight kitchen with floating shelves. While they won’t hide toasters and coffeemakers, they’re a sleek alternative to upper cabinetry, which often overwhelms a tiny space. | CoastalLiving.comSee the Light: Abund
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
×